Problem with Perle 494E

["Gary Luz" <garyl@xxxxxxxxxxxxxxxxxxxx>]

Hello,
I have configured a Perle 494-E for AnyNet/TCPIP services. I have
obtained a signon screen on the attached NWS.
I have an issue that after a while (1 hour or so), the signon will
disappear (even after waking up from sleep mode), but the as/400 still
shows that this NWS has a signon display. I have to vary off/on the
controller to get the display back. 
I've used the standard default for controller setup, likewise for the
as/400 using a single APPC controller description for this 5494
controller description.
A call to IBM have suggested to change the default AnyNet keep alive
values, but they won't say what to change them to.
Any help would be appreciated.
Thanks,
Gary Luz
 
This communication may contain privileged and/or confidential information.
It is intended solely for the use of the addressee. If you are not the intended 
recipient, 
you are strictly prohibited from disclosing, copying, distributing or using any 
of this 
information.  Violations are punishable by law.  
If you received this communication in error, please contact the sender 
immediately and
destroy the material in its entirety, whether electronic or hard copy. 
Confidential, 
proprietary or time-sensitive communications should not be transmitted via the 
Internet, 
because there is no assurance of actual or timely delivery, receipt and/or 
confidentiality.