RE: HMC and other consoles

["Eduard van den Braken" <Eduard.van.den.Braken@xxxxxxxxxxxxxx>]

Websm can be used for most of the HMC tasks.
If you need all the HMC tasks, you can use Client Access 5250 emulation
to the HMC and have all the functions on your PC

For operator like work you don't need (want to) use the HMC but a simple
telnet400, Client Access or Linux telnet5250 session to the iSeries in
question and do everything except Restricted state work (which is not an
operator job)

In V5R3 BRMS you can do full restricted backup without a console (in
batch)


===================================================
Met vriendelijke groet,
Inter Access BV

Eduard van den Braken
Technisch Consultant iSeries
===================================================
The information contained in this message may be confidential and 
is intended to be exclusively for the addressee. Should you receive 
this message unintentionally, please do not use the contents herein 
and notify the sender immediately by return e-mail.

-----Oorspronkelijk bericht-----
Van: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] Namens Carey Jeff - jcarey
Verzonden: donderdag 13 januari 2005 18:27
Aan: 'midrange-l@xxxxxxxxxxxx'
Onderwerp: HMC and other consoles

Can you use the HMC console and other console(s) as well?  We want the
tech
staff to get at the HMC console remotely if needed, but would like the
operators (who need a console) not to touch the HMC.  

Can we set up Ops Console and still have HMC acting as the console when
needed?


**********************************************************************
The information contained in this communication is
confidential, is intended only for the use of the recipient
named above, and may be legally privileged.
If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, 
distribution, or copying of this communication is strictly
prohibited.
If you have received this communication in error,
please re-send this communication to the sender and
delete the original message or any copy of it from your
computer system. Thank You.

-- 
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.