Re: HELP! I deleted QCMDEXC by mistake! OUCH!

I would re-slip OS/400 from your last SAVSYS.  You will need to re-apply
any subsequent PTF's.  Keep in mind that if you have applied any cum.
PTF's, you will be out of synch, so they will also have to be re-applied.
There is always a mismatch possibility between OS/400 and LPPs, which can
be worse than the problem that you currently have.  More questions, pick up
the phone.

Al

Al Barsa, Jr.
Barsa Consulting Group, LLC

400>390

"i" comes before "p", "x" and "z"
e gads

Our system's had more names than Elizabeth Taylor!

914-251-1234
914-251-9406 fax

http://www.barsaconsulting.com
http://www.taatool.com
http://www.as400connection.com



                                                                           
             "David C. Shea"                                               
             <dshea@xxxxxxxxxx                                             
             om>                                                        To 
             Sent by:                  "Midrange Systems Technical         
             midrange-l-bounce         Discussion"                         
             s@xxxxxxxxxxxx            <midrange-l@xxxxxxxxxxxx>           
                                                                        cc 
                                                                           
             12/19/2004 08:46                                      Subject 
             PM                        HELP!  I deleted QCMDEXC by         
                                       mistake!  OUCH!                     
                                                                           
             Please respond to                                             
             Midrange Systems                                              
                 Technical                                                 
                Discussion                                                 
             <midrange-l@midra                                             
                 nge.com>                                                  
                                                                           
                                                                           




I have a v4r5 box.  By accident, I deleted QCMDEXC from QSYS.
Unfortunately, that object seems to be involved in manymanymanymany
operations on the machine.  Like RSTOBJ.  Like FTP.  Like OUCH!

I have another v4r5 box, so I can get a copy of QCMDEXC.  The problems
seem to be:

1.           I can't use FTP to PUT a savf file onto the distressed
machine.
I can GET stuff off it, but I just can't PUT it.  I tried FTPing from
the distressed machine to the good machine.  That works, but GETting the
SAVF from the good machine fails also.

2.           I saved QCMDEXC onto tape from the good machine using SAVOBJ.
I
loaded the tape onto the distressed machine, but the restore fails when
it can't find QCMDEXC.

I'm afraid I'm going to have to reload the OS just to get this one
little dinky program back.

Unless any of you have any thoughts on a better way.

I'll try rebooting to see if the box is smart enough to recreate the
object.  IF that doesn't work, I guess I have no choice but to reinstall
the OS and the PTFs.

Yuck.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.