Re: Unload/Reload screwed up security.

[Evan Harris <spanner@xxxxxxxxxx>]

As I recall (and I'll have to hit the books for this one) the net effect is 
that you do the OS install after the restore which results in QUSRYSYS and 
QGPL getting upgraded correctly as part of the OS upgrade/install procedure.

I'll try and find a manual reference in case someone else doesn't chime in. 
I've done this stuff a few times when the target system does not support 
the operating system I'm migrating from.

> According to the Backup and Recovery Guide, appendix D you
> 4)  Install LIC
> 14)  Install the operating system
> 29)  Use GO RESTORE, option 21
> Which I did.  In the RSTCFG part of the GO RESTORE option 21 it restored
> the device descriptions and automatically created the output queues,
> (wrong) in the library QUSRSYS.  While it hasn't yet ran the RSTLIB
> portion, it must have created a base QUSRSYS with step 14 was ran.  And
> yes, the RSTAUT ran as part of step 29.  And although I see the CPF3776
> message when the RSTAUT was done, the flags thrown up are not for any
> output queues.  Weird files in QTEMP and the like.
>
> What would the slip install do different?
>
> Rob Berendt
> --
> Group Dekko Services, LLC
> Dept 01.073
> PO Box 2000
> Dock 108
> 6928N 400E
> Kendallville, IN 46755
> http://www.dekko.com
>
>
>
>
>
> Evan Harris <spanner@xxxxxxxxxx>
> Sent by: midrange-l-bounces@xxxxxxxxxxxx
> 09/23/2004 03:22 PM
> Please respond to
> Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
>
>
> To
> Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
> cc
>
> Fax to
>
> Subject
> Re: Unload/Reload screwed up security.
>
>
>
>
>
>
> Hi Rob
>
> If it was only LIC then according to my recollection QUSRYSYS shouldn't
> exist as it is installed as part of the OS install. Are you sure
> you  installed just the LIC ?
>
> Have you tried running RSTAUT ? Have you checed RSTAUT ran ?
>
> Sounds like the slip install instructions are what you ought to refer to
> for next time.
>
> Regards
> Evan Harris
>
> >We did an unload/reload following appendix D of the Backup and Recovery
> >Guide.  We did one modification we thought to "save" time.  Prior to the
> >downtime we preinstalled lic on the new system using the IBM CD's.  Just
> >lic - not OS or anything else.  This allowed us to initialize the disk
> >drives - a long running task on a 3.3TB machine.  We stopped at the start
> >of step 14.  In the past we used to use the SAVSYS to do the LIC install
> >but we upgraded to V5R3 after our last SAVSYS.
> >
> >We are wondering if this "time saving" step caused us numerous problems.
> >This is not our first unload/reload.  However this is the first time we
> >remember numerous painful events regarding security not being restored.
> >Here's one scenario:
> >Used GO RESTORE - 21.  Definitely told it to restore to a different
> >system, which, among other things appends ALWOBJDIF(*ALL) to all
> commands.
> >RSTCFG runs.  Restores devices, automatically creates matching output
> >queues in QUSRSYS.
> >RSTLIB of QUSRSYS runs.  Get numerous errors like
> >CPF370B    Information             10   09/18/04  09:07:12.299504
> QSRRSLIB
> >     QSYS        1015     QSRRLCP2    QSYS        0091