RE: APPC setup for SAVRSTLIB

["Pete Helgren" <pete@xxxxxxxxxx>]

Merci! Marc,

I saw Bryan's timely post last night and spent the time this morning walking
through the steps on both systems.  It worked great.  Very fast over the
VLAN.

Thanks to all who posted.

Pete


> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Marc Rauzier
> Sent: Friday, September 17, 2004 12:31 AM
> To: Midrange Systems Technical Discussion
> Subject: Re: APPC setup for SAVRSTLIB
>
>
> Le jeu. 16 sept. 2004 23:45:02, Pete Helgren écrivait:
>
> > The SAVRSTLIB command looked like just what my customer needed to
> > transfer libraries to/from their LPAR's using the VLAN that
> > connects them, but, for the life of me, I can't get the routing to
> > work.
> >
> > I first did the TCP routing entries, got everything pinging back
> > and forth and got nowhere.  I went to the archives and found some
> > entries about setting up SAVRSTLIB and discovered that I should be
> > using APPN to handle the communications.  There were some
> > controller description examples which I used to set things up.
> > But, I get an error when I try to use the command:
> >
> > Route to specified location not found.
> > An error occurred during the SAVRSTLIB operation.
> >
> > APING returns:
> > Verifying APPC connection to remote location JCPSDEV on mode
> > BLANK. Remote location JCPSDEV for conversation B not found.
> >        Command did not complete on the specified wait time.
> >
> > I tried to vary on the controller descriptions, they fail with:
> >
> > APPN session initiation attempt has failed.
> > System cannot call controller JCPSDEV. No lines available. (C R)
> >
> > All of which is to say: "You have configured it wrong"
> >
> > The controllers point to the VLAN line descriptions which I know
> > work because we can ping and FTP like crazy using them. Do I need
> > to create other line descriptions.
> >
> > I am very rusty on the APPC stuff.  A quick refresher would be
> > helpful.
> >
> > TIA.
> >
> > Pete Helgren
> > Timpanogos Technologies, Inc
> > 801.892.9106 x 202
> >
>
> You have to setup Anynet.
>
> In another thread on the discussion list "SNADS Configuration for VLAN"
> Bryan Dietz talks about an URL that can help you.
>
> http://www-
> 912.ibm.com/s_dir/slkbase.nsf/00e42b791a3dab7b862565c9004ec1af/c0e07348
> 5d35f074862569da0063626f?OpenDocument
>
> (or http://minilien.com/?lf6BwsqScp)
>
> --
> Cordialement/Best regards
> Marc Rauzier
>
> Opinions I stated here are my own.
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L)
> mailing list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>