Re: APPC setup for SAVRSTLIB

[Marc Rauzier <mrauzier@xxxxxxx>]

Le jeu. 16 sept. 2004 23:45:02, Pete Helgren écrivait:

> The SAVRSTLIB command looked like just what my customer needed to
> transfer libraries to/from their LPAR's using the VLAN that
> connects them, but, for the life of me, I can't get the routing to
> work. 
> 
> I first did the TCP routing entries, got everything pinging back
> and forth and got nowhere.  I went to the archives and found some
> entries about setting up SAVRSTLIB and discovered that I should be
> using APPN to handle the communications.  There were some
> controller description examples which I used to set things up. 
> But, I get an error when I try to use the command: 
> 
> Route to specified location not found.           
> An error occurred during the SAVRSTLIB operation.
> 
> APING returns:
> Verifying APPC connection to remote location JCPSDEV on mode
> BLANK. Remote location JCPSDEV for conversation B not found.      
>        Command did not complete on the specified wait time. 
> 
> I tried to vary on the controller descriptions, they fail with:
> 
> APPN session initiation attempt has failed.                     
> System cannot call controller JCPSDEV. No lines available. (C R)
> 
> All of which is to say: "You have configured it wrong" 
> 
> The controllers point to the VLAN line descriptions which I know
> work because we can ping and FTP like crazy using them. Do I need
> to create other line descriptions.
> 
> I am very rusty on the APPC stuff.  A quick refresher would be
> helpful. 
> 
> TIA.
> 
> Pete Helgren
> Timpanogos Technologies, Inc
> 801.892.9106 x 202
> 

You have to setup Anynet.

In another thread on the discussion list "SNADS Configuration for VLAN" 
Bryan Dietz talks about an URL that can help you.

http://www-
912.ibm.com/s_dir/slkbase.nsf/00e42b791a3dab7b862565c9004ec1af/c0e07348
5d35f074862569da0063626f?OpenDocument

(or http://minilien.com/?lf6BwsqScp)

-- 
Cordialement/Best regards
Marc Rauzier

Opinions I stated here are my own.