RE: Please HEEEELP !!!

[michaelr_41@xxxxxxxxxxxxxx]

We've had 6 drives fail in three months in an 825...had zero fail in
three years in a 730.

On Tue, 24 Aug 2004 16:02:41 +0200, "MITTELHEISSER Jean Claude"
<MITTELJC@xxxxxxx> said:
> Thank's Al. OK now.
> 
> I know that QUSRSYS is in SAVLIB *ALLUSR and I have some peaces from
> QUSRSYS but it was not complete. I took this job 6 months ago and saves
> were in place but I know now that system was alive at SAVLIB time. So
> files with exclusive control were not saved as some QAOK* files. When you
> have such problems you see the quality of your saves. We will do better
> in the future.
> 
> I have now installed QUSRSYS. It did'nt destroy files and it works well
> now.
> 
> Some details about our problem :
> I did'nt experience such problems in my whole life. We had a power
> problem on monday. Power was replaced on same day. But it probably
> initiated a disk failure in RAID system. Automatic call to IBM did not
> work and we were not informed too. On friday second disk failure. This
> time we were informed because system did'nt work anymore. Disk was
> replaced. I tried my whole week-end to recover from (corrupted) saves. I
> was neer to restart on monday and we had a third disk failure. Again
> replacement and this time we asked IBM to change controller. Hope we will
> start applications soon. System seemes OK now.
> 
> Bye.
> 
> -----Message d'origine-----
> De : midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx]De la part de Al Barsa
> Envoyi : dimanche 22 ao{t 2004 19:45
> @ : Midrange Systems Technical Discussion
> Objet : Re: Please HEEEELP !!!
> 
> 
> 
> 
> 
> 
> 
> If you prompt the help text for SAVLIB, QUSRSYS is contained in the group
> *ALLUSR, not *IBM.  Hopefully, you did a SAVLIB *NONSYS after you
> installed, and you could get it from there.  If you re-install QUSRSYS,
> other customizations might be lost.
> 
> If you do not have a SAVLIB *NONSYS, and no further save of QUSRSYS, I
> suggest that you re-install QUSRSYS from PID media as a slip install. 
> You
> will then have to re-PTF.
> 
> Al
> 
> Al Barsa, Jr.
> Barsa Consulting Group, LLC
> 
> 400>390
> 
> "i" comes before "p", "x" and "z"
> e gads
> 
> Our system's had more names than Elizabeth Taylor!
> 
> 914-251-1234
> 914-251-9406 fax
> 
> http://www.barsaconsulting.com
> http://www.taatool.com
> http://www.as400connection.com
> 
> 
> 
>                                                                            
>              "MITTELHEISSER                                               
>              Jean Claude"                                                 
>              <MITTELJC@xxxxxxx                                         
>              To 
>              >                         "Midrange Systems Technical         
>              Sent by:                  Discussion"                        
>              midrange-l-bounce         <midrange-l@xxxxxxxxxxxx>          
>              s@xxxxxxxxxxxx                                            
>              cc 
>                                                                            
>                                                                    Subject 
>              08/22/2004 12:55          Please HEEEELP !!!                 
>              PM                                                           
>                                                                            
>                                                                            
>              Please respond to                                            
>              Midrange Systems                                             
>                  Technical                                                
>                 Discussion                                                
>              <midrange-l@midra                                            
>                  nge.com>                                                 
>                                                                            
>                                                                            
> 
> 
> 
> 
> hi all,
> 
> I try to install some IBM stuff after scratch of ` 9406-820 in V4R5
> because
> we have no SAVLIB *IBM. Unfortunately QAOKP01A from QUSRSYS couln't be
> saved and system nead it on RSTDLO or install LIC. I have no AS/400 with
> same version. How can I procede to recover ? Do I have to re-install
> QUSRSYS from "Install LIC pgm" ? In this case will other objects be
> destroyed ?
> 
> Thanks.
> Jean-Claude
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
> 
> 
> 
> 
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
> 
> 
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
> 
-- 
  
  michaelr_41@xxxxxxxxxxxxxx