RE: Unload Tape from CL Pgm?

[rob@xxxxxxxxx]

Good points.

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





"Jones, John (US)" <John.Jones@xxxxxxxxxxxxxxxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
08/17/2004 11:06 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
cc

Fax to

Subject
RE: Unload Tape from CL Pgm?






True, and I have used that in the past.  Kinda forgot about it in my
rush to respond. :)

Still, DSPTAP is what I usually wind up using.  I usually want a SPLF of
the tape contents in addition to the eject.  For tracking the contents
of a tape (we don't have BRMS), that can be handy.  It could also be
valuable if the problem Mike is having is tape-related.  In fact, I
might add the DATA(*SAVRST) for a more complete dump of the tape's
contents.

John A. Jones
Americas Security Officer
Jones Lang LaSalle, Inc.
V: +1-630-455-2787 F: +1-312-601-1782
John.Jones@xxxxxxxxxxxxxxxxxxxxxxx

-----Original Message-----
From: rob@xxxxxxxxx [mailto:rob@xxxxxxxxx] 
Sent: Tuesday, August 17, 2004 10:54 AM
To: Midrange Systems Technical Discussion
Subject: RE: Unload Tape from CL Pgm?

John,

CHKTAP's much faster than DSPTAP in just chucking the sucker out of the
drive.

Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com


"Jones, John (US)" <John.Jones@xxxxxxxxxxxxxxxxxxxxxxx> 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
08/17/2004 10:41 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
cc

Fax to

Subject
RE: Unload Tape from CL Pgm?






When I need to eject a tape from a command line or in a CL, I usually
use:

DSPTAP DEV(TAPxx) OUTPUT(*PRINT) ENDOPT(*UNLOAD)
MONMSG CPF0000 

John A. Jones
Americas Security Officer
Jones Lang LaSalle, Inc.
V: +1-630-455-2787 F: +1-312-601-1782
John.Jones@xxxxxxxxxxxxxxxxxxxxxxx

-----Original Message-----
From: Michael Naughton [mailto:michael_naughton@xxxxxxxxxxxx] 
Sent: Tuesday, August 17, 2004 10:32 AM
To: Midrange Systems Technical Discussion
Subject: Unload Tape from CL Pgm?

Hi Everyone,

I thought I had seen a discussion of this a while back, but I've
searched the archives and come up with nothing. We've got a batch job
that does various things and then copies some files from a tape.

The CPYF command is set to unload the tape when it's done, but if the
job runs into a problem before it gets there the tape never unloads. I'd
like to put in an error handler that will abort the job and unload the
tape, but I don't see a CL command that does that. I tried RMVTAPCTG,
but that seems to apply to media library devices, which we don't have.
All I want to do is what the CPYF command does with the *UNLOAD option.

Any suggestions as to what I might try?  Thanks very much,

Mike Naughton
Senior Programmer/Analyst
Judd Wire, Inc.
124 Turnpike Road
Turners Falls, MA  01376
413-863-4357 x444
mnaughton@xxxxxxxxxxxx


This email is for the use of the intended recipient(s) only.  If you have 
received this email in error, please notify the sender immediately and 
then delete it.  If you are not the intended recipient, you must not keep, 
use, disclose, copy or distribute this email without the author's prior 
permission.  We have taken precautions to minimize the risk of 
transmitting software viruses, but we advise you to carry out your own 
virus checks on any attachment to this message.  We cannot accept 
liability for any loss or damage caused by software viruses.  The 
information contained in this communication may be confidential and may be 
subject to the attorney-client privilege. If you are the intended 
recipient and you do not wish to receive similar electronic messages from 
us in future then please respond to the sender to this effect.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.