Re: AFP - *OVL issue

Is there an OVRPRTF when the pgm runs, and what does it say?
DSPFD of the printer file should show the overlay you specified.
Once spool generated, Opt 8 of wrksplf should show that it has
Printer Dev Type = *AFPDS and Overlay = your overlay.
jim
----- Original Message ----- 
From: "Fabrice Calmelat" <f.calmelat@xxxxxxxxxxxxxxxxxxxxxxx>
To: "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
Sent: Tuesday, January 27, 2004 12:48 PM
Subject: RE: AFP - *OVL issue


> Hi Rich,
>
> The printer is a LEXMARK Optra S2455 which is attached to the LAN and I
> can't see the device description from the 400.
>
> Concerning the PRTF, I tried using the FRONTOVL parameter and
> DEVTYPE(*AFPDS) but also specifying the overlay details within the DDS.
None
> of them worked...
>
> I downloaded some samples from the IBM website (PRTF, OVL and RPG), ran
them
> off and printed the reports on this printer, but I couldn't get the logos
> and frames to print (although the barcodes printed ok). I tried them on an
> IBM printer too, and again, it didn't work.
>
> I'm really puzzled as it seems to be a very simple operation and I
followed
> the step-by-step procedure to the letter.
>
>
> One funny thing is that I can display the spool file before printing it,
> which I believe shouldn't be possible because of the overlay. Strange...
>
> Any ideas and clues are most welcome...
>
>
> Fabrice.
>
>
> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx
> [mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Rich Duzenbury
> Sent: 27 January 2004 17:10
> To: Midrange Systems Technical Discussion
> Subject: Re: AFP - *OVL issue
>
> On Tue, 2004-01-27 at 10:01, Fabrice Calmelat wrote:
> > Hi,
> >
> > I have created an overlay using the IBM AFP driver and the CRTOVL
command.
> > This went smoothly and I can compile a PRTF referencing this overlay.
> > However, when I print my report, the overlay does not get printed and I
> only
> > get the data.
> >
> > Any ideas?
> Make sure to specify devtype(*afpds) frontovl(myovl) on the CRTPRTF
> comnmand.  You're sending it to an IPDS printer, or a printer running
> host print transform, too, right?
>
> >
> >
> > Fabrice
> >
> >
> >
> > _______________________________________________
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> > To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/midrange-l.
> >
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>