RE: V5R2 - QRMTSIGN Problem - Resolved (Sort of)

["John Earl" <john.earl@xxxxxxxxxxxxxxxxxx>]

Shannon,

One question... When this process was failing, were you getting an invalid
password (Type PW) journal entry in the QAUDJRN/

jte

--
John Earl | Chief Technology Officer
The PowerTech Group
19426 68th Ave. S
Seattle, WA 98032
(253) 872-7788 ext. 302
john.earl@xxxxxxxxxxxxxxxxxx
www.powertech.com 
 

--
 

> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-
> bounces@xxxxxxxxxxxx] On Behalf Of Shannon O'Donnell
> Sent: Friday, April 11, 2003 9:13 AM
> To: Midrange Systems Technical Discussion
> Subject: Re: V5R2 - QRMTSIGN Problem - Resolved (Sort of)
> 
> OK...I got the *SAMEPRF working now.  The only thing I did differently was
> to use an internal IP address (direct connect between the V5R2 and V5R1
> systems) rather than an external IP address (one that went through our
> router).   Using the internal IP I can do transparent logon's between V5R2
> and V5R1.  Using the external IP, going through our router, I cannot.
> 
> So...time to contact our ISP, since they control our router (we don't have
> access to change it at all), and try to figure out what's going on.
> 
> Thanks for the responses on this.
> 
> Shannon O'Donnell
> 
> 
> ----- Original Message -----
> From: "Carsten Flensburg" <flensburg@xxxxxxxxxx>
> To: "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
> Sent: Friday, April 11, 2003 10:31 AM
> Subject: Re: V5R2 - QRMTSIGN Problem
> 
> 
> > Hello Shannon,
> >
> > I experience the same behaviour as you do when telnetting from my V5R1
> to
> > V5R2 machine - but as I read the telnet command helptext *SAMEPRF is
> treated
> > the same way as *VERIFY - here's what it says:
> >
> > "If you are connecting to an AS/400 TELNET server, then the QRMTSIGN
> system
> > value must be set to *SAMEPRF or *VERIFY.  For TELNET, the *SAMEPRF
> setting
> > is treated the same as the *VERIFY setting because the TELNET server
> only
> > receives the user profile name specified on the STRTCPTELN command.  It
> does
> > not receive the user profile name of the job using the STRTCPTELN
> command
> > and cannot enforce the profiles being the same on both systems."
> >
> > Best regards,
> > Carsten Flensburg
> >
> > ----- Original Message -----
> > From: "Shannon O'Donnell" <sodonnell@xxxxxxxxxxxxxxx>
> > To: "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
> > Sent: Friday, April 11, 2003 4:41 PM
> > Subject: Re: V5R2 - QRMTSIGN Problem
> >
> >
> > > John,
> > >
> > > Both of my systems (V5R1 and V5R2) are set to use 10 character
> passwords.
> > > As far as I can tell, both systems have exactly the same settings for
> > System
> > > Security Values.
> > >
> > > *SAMEPRF still doesn't work.....wonder if this is an undocumented
> > "feature"
> > > of V5R2?
> >
> >
> > _______________________________________________
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> > To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> > or email: MIDRANGE-L-request@xxxxxxxxxxxx
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/midrange-l.
> 
> 
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.