RE: Automatic Performance adjustment

["Jones, John (US)" <John.Jones@xxxxxxxxxxxxxxxxxxxxxxx>]

Thanks, Scott.  Nice catch; I'll adjust it.

- John

-----Original Message-----
From: Ingvaldson, Scott [mailto:SIngvaldson@xxxxxxxxxxxx] 
Sent: Monday, March 03, 2003 11:55 AM
To: 'midrange-l@xxxxxxxxxxxx'
Subject: RE: Automatic Performance adjustment


I can answer this one, if you look at WRKSHRPOOL and do an F11 to
display the Tuning Data, you'll see that the minimum percentage of
storage for the interactive pool is probably set to 10% (200 MB)  You
can manually change the pool to 50 MB, but it will move back up to the
minimum no matter what the workload is.  You need to change the minimum
percentage to a lower value to get it to stay down.

Scott Ingvaldson
AS/400 System Administrator
GuideOne Insurance Group
This e-mail is for the use of the intended recipient(s) only.  If you have 
received this e-mail in error, please notify the sender immediately and then 
delete it.  If you are not the intended recipient, you must not use, disclose 
or distribute this e-mail without the author's prior permission.  We have taken 
precautions to minimize the risk of transmitting software viruses, but we 
advise you to carry out your own virus checks on any attachment to this 
message.  We cannot accept liability for any loss or damage caused by software 
viruses.