Re: TCP2617 at V5R2

[rob@xxxxxxxxx]

CHGTCPA
TCP close connection message . . TCPCNNMSG

Rob Berendt
-- 
"They that can give up essential liberty to obtain a little temporary 
safety deserve neither liberty nor safety." 
Benjamin Franklin 




Neil Palmer <neilp@dpslink.com>
Sent by: midrange-l-bounces@midrange.com
02/07/2003 12:10 PM
Please respond to Midrange Systems Technical Discussion
 
        To:     Midrange Systems Technical Discussion 
<midrange-l@midrange.com>
        cc: 
        Fax to: 
        Subject:        TCP2617 at V5R2


Anyone seeing a lot of these in QSYSOPR (system is on V5R2) - and know 
exactly what this means ?

Message ID . . . . . . :   TCP2617       Severity . . . . . . . :   20 
Message type . . . . . :   Diagnostic 
Date sent  . . . . . . :   02/07/03      Time sent  . . . . . . : 12:01:54 

 
 
Message . . . . :   TCP/IP connection to remote system 149.174.32.133 
closed, 
  reason code 2. 
Cause . . . . . :   The TCP/IP connection to remote system 149.174.32.133 
has 
  been closed. The connection was closed for reason code 2.  Full 
connection 
  details for the closed connection include: 
    - local IP address is xxx.xxx.xxx.xxx  (EDITED OUT) 
    - local port is 14669 
    - remote IP address is yyy.yyy.yyy.yyy (EDITED OUT) 
    - remote port is 25 
Reason codes and their meanings follow: 
    1 = TCP connection closed due to expiration of 10 minute Close Wait 
timer.
    2 = TCP connection closed due to R2 retry threshold being run. 
    3 = TCP connection closed due to keepalive timeout. 
If TCPCNNMSG(*THRESHOLD) is defined for the Change TCP/IP Attributes 
(CHGTCPA)
  command then there could be additional connections that have closed 
within 
  the threshold window. The number of additional TCP connections that have 

 
  closed is 0. 
Recovery  . . . :   Informational message. 



...Neil
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.