× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Thanks Vern... I will look at that.

-----Original Message-----
From: Vern Hamberg

Here's a link for the J14, which says it's the UPS cable. Is that what you 
mean?

<http://www-912.ibm.com/s_dir/slkbase.nsf/c5100f8165ec3eb386256c230059fbac/6
29a70fdb2bdfd6786256c32004998c6>

On our older 270, this cable has the center pin (of the 5-pin side, not the 
4-pin side) missing (for allowing insertion in only one port). All other 
pins are present, both ends.

Found this link via IBM's improved search engine - searched for J14. No 
finds for J19.

HTH

Vern

At 11:33 AM 1/28/2003 -0600, you wrote:
>We are trying to make a new cable from our new UPS to the servers. We have
>been unable to have it successfully work. Does anyone have or know where to
>fine the pin out diagrams for the J19 port? I have searched Google quite a
>bit and have found nothing that really works.
>
>Mike Wills
>iSeries Programmer

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.