Re: V5R1 Mgmt Central not starting.

[Vern Hamberg <vhamberg@xxxxxxxxxxxxxxxxxxxxxxxxx>]

Frank

Did you see the other posts from other folk? They mentioned some things, 
like the hosts setup on your iSeries, etc.

Did this used to work? Is this after an upgrade? Did you look at the 
iSeries Express site, to see what PTFs need to be installed for V5R2 of 
iSeries Express?

That's as far as I can get. Hope you have software support, you might need 
to get to them.

HTH

Vern

At 09:45 AM 1/22/2003 +1000, you wrote:
> I appreciate your help Vern. I think I missed the PTF because
> I left the limit at 50 APARS.
> I applied the PTF but MGTC still fails with the same message.
> Is there some sort of setup I need to do on JAVA.
> I assume there is a reason why OPS NAV is starting a JAVA
> process but I have no idea what.
> In the APARs I find no reference to CPFB9BC.
>
> What do you suggest I try now.
>
> Thanks
> Frank Kolmann
>
>
> From: Vern Hamberg <vhamberg@centerfieldtechnology.com>
> Frank
>
> I ran a search at IBM's improved search site and found PTF SI04825, which
> "will correct an initialization problem that was causing the failure of the
>
> Management Central Job Monitors."
>
> The improved site is
> <
> http://www-912.ibm.com/ImprovedSearch/SearchBroker?selScope=More&action=fromMasthead&q
>
> &Search.x=39&Search.y=13>
> and it's supposed to be even better after tomorrow - over 75 IBM sources
> will be included, I've been told.
>
> HTH
>
> Vern
>
> At 05:19 PM 1/21/03 +1000, you wrote:
> >We are on V5R1 and have recent cumes.
> >I have V5R0 Client Access. Whether I start MGTC from OPS NAV or
> >a command line I get the message below.
> >I checked the archives and the IBM APARS. I have found no relevant info.
> >I know nothing about Java.  Has anyone a suggestion as to what I should do
> >next, perhaps submit an APAR.
> >TIA
> >Frank Kolmann
> >                                      Message . . . . :  -QSYS/CALL
> >PGM(QSYSDIR/QYPSJSVR)
> >CPFB9BC    Diagnostic              40    21/01/03   18:03:59   QYJSPART
> >QSYS        *STMT    QYJSPART     QSY
> >                                      From module . . . . . . . . :
> >QYJSPPGM
> >                                      From procedure  . . . . . . :
> >callProgram
> >                                      Statement . . . . . . . . . :   93
> >                                      To module . . . . . . . . . :
> >QYJSPPGM
> >                                      To procedure  . . . . . . . :
> >callProgram
> >                                      Statement . . . . . . . . . :   93
> >                                      Message . . . . :   Initialization
> >failed.
> >                                      Cause . . . . . :   Static
> >initialization of class
> >                                        com.ibm.mc.client.McEnvironment
> >failed. Recovery  . . . :   If the problem
> >                                        persists, contact service.