Re: UPS for 9406-170

[Neil Palmer <neilp@xxxxxxxxxxx>]

A bit pricey, but check out the Black Box catalog.

...Neil





"Dennis Lovelady" <dlovelady@dtcc.com>



        To:     midrange-l@midrange.com
        cc:
        Subject:        Re: UPS for 9406-170



Along these same lines, we have a 9406-170 that was attached to a UPS, but
the UPS (not under maintenance) has died.  We'd like to opt for a cheaper
solution (such as SmartUPS).  The problem we have is that the power cables
do not have ends that will plug into a standard (US) receptacle.

How would I go about obtaining the necessary power cables to eliminate the
170's dependence on that defunct piece of equipment?

Thanks,
Dennis





"Steve Landess" <steve_landess@hotmail.com>@midrange.com on 11/22/2002
03:53:44 PM

Please respond to midrange-l@midrange.com

Sent by:    midrange-l-admin@midrange.com


To:    <midrange-l@midrange.com>
cc:
Subject:    UPS for 9406-170


This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
All,

I need to get a UPS for my 9406-170.  My requirements are basically that I
need to protect my system from power spikes.  I don't need to keep the
system alive for very long, really just long enough to power it down in
the
event of an extended power outage.  I have done a little research, and I'm
not sure if I want to use a 9910.

Whatever unit I buy, it would be nice to be able to cable it to the AS/400
so I can enable the auto power-down feature on the AS/400 side.  Do I have
to have a particular type of UPS and cable in order to enable this
feature?

Anybody have a recommendation for this?  Brand? / Supplier?  Can I just go
to Fry's Electronics and buy an appropriately sized unit?