Re: LPR printer writer abends

["Jim Franz" <franz400@xxxxxxxxxxxx>]

What mfrtypmdl are you using? *hp4?
also recommended values for the Remote Printer Queue (RMTPRTQ) parameter ?
(case sensitive)
      HP JetDirect Card (Internal) 'raw' (formatted output)
      'text' (unformatted text)
      Note: Some newer HP JetDirect cards, like the 170X and 300X, may
instead use 'RAW' for formatted output or 'TEXT' for unformatted text.
      HP JetDirect Server (External)
      (3 Ports - 1 I/P Address) 'raw1' for parallel port 1 (formatted
output)
      'text1' for parallel port 1 (unformatted text)
      'raw2' for parallel port 2 (formatted output)
      'text2' for parallel port 2 (unformatted text)
      'raw3' for parallel port 3 (formatted output)
      'text3' for parallel port 3 (unformatted text)
      Note: Some newer HP JetDirect servers may instead use 'RAW1', 'RAW2'
or 'RAW3' for formatted output or 'TEXT1', 'TEXT2' or 'TEXT3' for
unformatted text.


hth
jim franz

----- Original Message -----
From: "Jay Maynard" <jmaynard@conmicro.cx>
To: <midrange-l@midrange.com>
Sent: Saturday, September 14, 2002 10:09 AM
Subject: LPR printer writer abends


> I'm trying to set up printing via LPR to a LaserJat 4Si with JetDirect
card
> from OS/400 4.3. (If I can ever get the 5.1 install media from IBM, I'll
> upgrade...ordered it three weeks ago.) Starting the print writer succeeds,
> but then the writer fails with an internal program error in module
WPPJLDR,
> procedure Socket_Connect. The diagnostic message ID is CPD337A.
>
> Looking through the archives, I see a couple of other folks have had this
> problem. Has anyone out there successfully printed to a LaserJet via LPR
> with the PCL driver?
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>