Re: Netserver Stopped

["Roger Vicker, CCP" <rvicker@xxxxxxxxxx>]

Eric,

Are you on V5R1M0?

I had this same thing a week ago after going to V5R1M0 and using the AS/400 as a
logon server. The only way to get it back was that rare thing for the AS/400 --
re-ipl. In our case after long enough all of TCP would die. Support line was
able to dial in and found that one particular PC (WinXP Pro) was sending
continuous requests to the AS/400 and it wasn't dealing with the situation
properly. A table some where was overflowing. If you do a NETSTAT and take
option 3 then see a lot of lines with Close-Wait status you probably have the
problem. We took the offending PC off the network and the developer had two
"Test" PTFs so the AS/400 would deal with the situation properly. You will have
to contact support line since the PTFs are not available for general download
and they have to release them for you.

Roger Vicker, CCP

Eric Sundell PMI wrote:

> This message is in MIME format. Since your mail reader does not understand
> this format, some or all of this message may not be legible.
> --
> We just had our Netserver stop and now it won't start, gets error code 5 -
> Start of the NetBIOS over TCP/IP failed with return code 3418.
>
>     5 - Start AS/400 NetServer with the reset option using the Start Server
>
>   (QZLSSTRS) API.  If the problem continues, restart TCP/IP with the End
>
>   TCP/IP (ENDTCP) and Start TCP/IP (STRTCP) commands.  Note:  This may
> affect
>   other users.  When TCP/IP is active, start AS/400 NetServer with the reset
>
>   option using the Start Server (QZLSSTRS) API. If the problem continues,
>
>   contact your service provider.
>
> Any clues?
> --
> [ Content of type application/ms-tnef deleted ]
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.

--
*** Vicker Programming and Service *** Have bits will byte *** www.vicker.com
***
It's not where we stand, but in what direction we are moving that is important.