RE: AS/400 Access via the Internet

I'm using a LinkSys router and have no problems with connecting over the
cable modem through the router, and no problem with a dial-up modem to
another AS/400 at another client site.  Both work well and work
simultaneously.

This does trigger a thought in my mind though.  For other reasons all
together I have gone into the LinkSys router configuration under "Advanced"
and changed my machine to be in the DMZ.  Maybe thats needed for Client
Access?  If so, I lucked out.


--------------------------------------------
Booth Martin
MartinB@Goddard.edu
802-454-8315 x235
--------------------------------------------
-------Original Message-------
From: midrange-l@midrange.com
Date: Wednesday, December 05, 2001 11:36:49 PM
To: midrange-l@midrange.com
Subject: RE: AS/400 Access via the Internet
Lester,
Check the archives for this because I know we've talked about it. I first
bought a LinkSys router that did exactly what you're describing, exchanged
it - same problem. Then I replaced it with a NetGear router and I've had no
problems since. But, others have posted that they use LinkSys with no
problems. Look for posts from John Taylor because he went all out looking
for the cause. I don't know what he wound up doing.
Phil
> -----Original Message-----

> From: midrange-l-admin@midrange.com

> [mailto:midrange-l-admin@midrange.com]On Behalf Of Lester S. Shaw

> Sent: Wednesday, December 05, 2001 11:11 PM

> To: MIDRANGE-L@midrange.com

> Subject: AS/400 Access via the Internet

>

>

> This is a multi-part message in MIME format.

> --

> [ Picked text/plain from multipart/alternative ]

> Little background. I was connecting to the company AS400 over

> the internet

> via a VPN connection. I had a DSL connection with DSL modem

> attached to PC.

> Not sure if it matters, but I running Windows ME and connecting

> with Client

> Access Express 5.0. Connection to AS400 worked fine.

>

> Recently I set up a network at home. PC now is connected to hub via

> Ethernet connection. I have a new DSL modem attached to the hub.

> I connect

> to the internet just as before with no problems. I can connect

> to my AS400

> using VPN connection. My problem is that after about 7-10 minutes my

> session goes down on the AS400. The job stays active, but screen

> turns all

> black. It seems that the more activities I perform on the AS400,

> the faster

> I lose my connection. Its seems that there is some buffer of

> some sort that

> once it gets filled, I lose the session, but that is just a guess.

>

> The network guys at work set the network up and made some changes

> to Network

> settings on my pc. They do not know why am I losing my

> connection. Other

> programmers are connecting through same hub, only difference is that they

> are using cable modems instead of DSL.

>

> Are there any additional settings I need to check on my PC, my VPN

> connection, or hub? Any advice would be appreciated.

>

> Thanks in advance,

>

> Lester

> --

>

>

> _______________________________________________

> This is the Midrange Systems Technical Discussion (MIDRANGE-L)

> mailing list

> To post a message email: MIDRANGE-L@midrange.com

> To subscribe, unsubscribe, or change list options,

> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l

> or email: MIDRANGE-L-request@midrange.com

> Before posting, please take a moment to review the archives

> at http://archive.midrange.com/midrange-l.

>

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.