RE: DDM over IP Problems

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--
[ Picked text/plain from multipart/alternative ]
Patrick,
The WMS system is running an RPGLE program that reads a file from the ERP
system.  The RPGLE program is called from a CLP that does an OVRDBF command
to override the File to a DDM file.  The WMS system job does not receive
errors, neither does the server job running on the ERP system.  The file
being read is a logical over a physical file that is updated via a RPGLE
trigger program.  The trigger program is receiving the unable to allocate
resource message.


> -----Original Message-----
> From: Patrick Townsend [SMTP:patownsend@patownsend.com]
> Sent: Sunday, November 18, 2001 11:07 AM
> To:   midrange-l@midrange.com
> Subject:      Re: DDM over IP Problems
>
> Bill,
>
> On the WMS system where the write to the file is happening, and you are
> seeing the error message "Unable to allocate resources", is there any
> diagnostic information in the second level text (put the cursor on the
> message and press F1)? With DDM you may also find a message before or
> after
> that message with more diagnostic information.
>
> On the ERP system is the RMTSRV job getting any error messages in its job
> log?
>
> I'm not expert on trigger programs and what might cause errors on DDM
> interfaces. Hopefully someone in the list will be able to help out.
>
> Patrick
>
> ----- Original Message -----
> From: "Bill Erhardt" <ERHARDT@BaldwinHQ.com>
> To: <midrange-l@midrange.com>
> Sent: Saturday, November 17, 2001 2:52 PM
> Subject: RE: DDM over IP Problems
>
>
> > This message is in MIME format. Since your mail reader does not
> understand
> > this format, some or all of this message may not be legible.
> > --
> > [ Picked text/plain from multipart/alternative ]
> > Patrick,
> > I get confused with source and target, but let's say the source is our
> ERP
> > system and the target is the WMS system.  I have a DDM file pointing to
> the
> > file on the ERP system (by the way it's a logical file).  The
> application
> > that fails is a trigger program that attempts to write to the file that
> is
> > opened via DDM.  The error I get is - Unable to allocate the required
> > resources.  As soon as I end the RMTSRV job in QSYSWRK the problem goes
> > away.  Can it be a problem because the target file is opened by a
> trigger
> > program?
> >
> > > -----Original Message-----
> > > From: Patrick Townsend [SMTP:patownsend@patownsend.com]
> > > Sent: Saturday, November 17, 2001 12:27 PM
> > > To: midrange-l@midrange.com
> > > Subject: Re: DDM over IP Problems
> > >
> > > Bill,
> > >
> > > A couple of thoughts:
> > >
> > > 1. Could you be having a security problem in the direction that is
> > > failing?
> > > DDM will validate the user ID of the source system. If the jobs on the
> > > source system run under a different profile each time, you might be
> having
> > > this type of problem.
> > >
> > > 2. When the job fails are you getting any messages in the job log?
> > > Normally
> > > on the source system you will have one or more error messages about
> the
> > > DDM
> > > failure. The second level text on these messages can be helpful in
> > > diagnosing the cause of the problem. You can send them to me off line
> if
> > > you
> > > need some help with the problem.
> > >
> > > 3. (OK, more than a couple) On the target system there will be a job
> in
> > > the
> > > QSYSWRK or QSERVER subsystem that is servicing the DDM request. There
> can
> > > be
> > > messages in the job log that are helpful.
> > >
> > > Patrick
> > > ----- Original Message -----
> > > From: "Bill Erhardt" <ERHARDT@BaldwinHQ.com>
> > > To: "'Mid Range list - Questions'" <MIDRANGE-L@midrange.com>
> > > Sent: Friday, November 16, 2001 1:30 PM
> > > Subject: DDM over IP Problems
> > >
> > >
> > > > This message is in MIME format. Since your mail reader does not
> > > understand
> > > > this format, some or all of this message may not be legible.
> > > > --
> > > > [ Picked text/plain from multipart/alternative ]
> > > > We have two AS/400's one runs our ERP the other runs our WMS.  We
> use
> > > DDM
> > > > over an IP connection to access remote files.  When I access WMS
> files
> > > from
> > > > the ERP system everything is fine.  When I try to access ERP files
> from
> > > the
> > > > WMS system, the remote file is locked and applications running on
> the
> > > ERP
> > > > system start failing.  Any ideas?
> > > > Bill Erhardt
> > > > --
> > > >
> > > >
> > > > _______________________________________________
> > > > This is the Midrange Systems Technical Discussion (MIDRANGE-L)
> mailing
> > > list
> > > > To post a message email: MIDRANGE-L@midrange.com
> > > > To subscribe, unsubscribe, or change list options,
> > > > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> > > > or email: MIDRANGE-L-request@midrange.com
> > > > Before posting, please take a moment to review the archives
> > > > at http://archive.midrange.com/midrange-l.
> > > >
> > > >
> > >
> > > _______________________________________________
> > > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> > > list
> > > To post a message email: MIDRANGE-L@midrange.com
> > > To subscribe, unsubscribe, or change list options,
> > > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> > > or email: MIDRANGE-L-request@midrange.com
> > > Before posting, please take a moment to review the archives
> > > at http://archive.midrange.com/midrange-l.
> > --
> >
> >
> > _______________________________________________
> > This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> > To post a message email: MIDRANGE-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> > or email: MIDRANGE-L-request@midrange.com
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/midrange-l.
> >
> >
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
--