Re: SST accounts

[Jim Langston <jlangston@xxxxxxxxxxx>]

Okay, I tried that like I said in my last message, but
couldn't get the console up, but then found that the
only thing that inserting the key did was allow me to
open the front cover, that it was a mechanical connection,
not electronic.

Where do I stick the key other than the front plastic cover
for the AS/400 to recognize that I turned it?

Regards,

Jim Langston

Message: 1
From: "Carsten Flensburg" <flensburg@novasol.dk>
To: <midrange-l@midrange.com>
Subject: Re: SST accounts
Date: Fri, 19 Oct 2001 19:08:11 +0200
Organization: Novasol Data AS
Reply-To: midrange-l@midrange.com

Hello Jim,

To enable the DST user profiles you have to enter the DST menu - to do that
without having to IPL:

1. Insert key
2. Select manual mode
3. Select function 21 - press enter button

The console should now display the DST menu:

4. Select option 5. Work with DST environment
5. Select option 3. Service tools user profiles
6. Select option 5. Enable - for the user profiles in question
7. Back to DST main menu and F3 to exit.
8. Switch back to normal mode and remove key.

- Also note that the DST passwords as of V5R1 are case sensitive (and can be
up to 128 bytes long).

Best regards,
Carsten Flensburg


----- Original Message -----
From: <midrange-l-admin@midrange.com>
To: <midrange-l@midrange.com>
Sent: Friday, October 19, 2001 6:22 PM
Subject: SST accounts


> So, the question becomes, how do I re-enable these accounts?  There is no
> AS/400
> user profile with these account names.  I'm thinking an IPL *might* reset
> these accounts,
> but maybe it won't.