RE: IBM 4019 Laser Printer setup on the As400

["Lou Schmaus" <lschmaus@xxxxxxxxxxx>]

Peter,

First, you need to change the Destination Type to '*OTHER'. The '*OS400'
would only be used if the printer was already set up on another
AS400/iSeries, and the IP address entered was the IP of the other /400, not
the printer itself.

BTW, if the printer is attached to something like a HP JetDirect print
server, it may be possible to set a Device of type *LAN, instead of a remote
outq.


Lou Schmaus
CCA, Inc.
Jackson, NJ 08527
lschmaus@link400.com
www.freightblue.com



-----Original Message-----
From: midrange-l-admin@midrange.com
[mailto:midrange-l-admin@midrange.com]On Behalf Of Peter_Vidal@pall.com
Sent: Thursday, October 11, 2001 3:16 PM
To: midrange-l@midrange.com
Subject: Re: IBM 4019 Laser Printer setup on the As400



The printer is attached to the LAN.  I can see it on the Network
Neigborhood.  I
did create an output queue for it:
Remote system  . . . . . . . . . . . . :   *INTNETADR
Remote printer queue . . . . . . . . . :   AP_PRT
Connection type  . . . . . . . . . . . :   *IP
Internet address . . . . . . . . . . . :   150.150.81.23
Destination type . . . . . . . . . . . :   *OS400
Manufacturer type and model  . . . . . :   *IBM4019

What I need to do?




                    Pat Barber
                    <mboceanside@worldne        To:
midrange-l@midrange.com
                    t.att.net>                  cc:
                    Sent by:                    Subject:     Re: IBM 4019
Laser Printer setup on
                    midrange-l-admin@mid        the As400
                    range.com


                    10/11/01 02:38 PM
                    Please respond to
                    midrange-l






A fairly old printer, but one that is supported in a number of ways.

The question of the day is "How do you have it connected ???"

If it's connected to a 5250 terminal with basic emulation, that's
pretty straight forward.(create a devd and use HPT)

If it's connected to a pc running CA/400, that's pretty straight
forward.(create a devd and use HPT)

If it's connected via twinax, it will auto config with no problem.

For a more thorough laundry list of methods, look here:

http://www.as400service.ibm.com/s_dir/slkbase.NSF/acf2ee1e9d64b16e8625680b00
020389/b44a2cf4ba778d83862568250053649f?OpenDocument&ExpandSection=35#_Secti
on1




Peter_Vidal@pall.com wrote:
>
> Hi everyone!
>
> I have this printer on attached my network and I want to use it as a extra
> printer for my AS400 users.  I did this for a different printer in the
past
but
> is not working for this printer.  I created the outq and I am trying to
create
> the device but I am having problems here.  Which are the detailed steps I
need
> to take?
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.





_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.