Re: DO I IPL?

["Marc Rauzier" <marc.rauzier@xxxxxxxxxxxxxxx>]

On 1 Oct 2001, at 14:43, Max Tee wrote:

Hello Max

> I have an ASYNC PC connection to a 9406-S20 using CA,
> OS V4R5.
>
> I turned of my 3Com Superstack 10/100 switch and the
> Server varies off the ETHNET01 and shuts off the
> TCP/IP servers.
>
> I  to varied off the line that had 'status' RCYPND. On
> the status bar below it showed the 'X System' that it
> was processing. I hit F5 to refresh and now the system
> seem to have stalled.
>
> I rebooted the PC and tried to reconnect. It seems to
> connect but get no signon..only an 'X System'
> processing status. Any action gives me a RED "X ?+"
> Moving the cursor to another part of the screen and
> hitting return gives me a RED "? and a man crucified'
> Without TCP I can't start a mochasoft session to check
> for QSYSOPR/other messages.
>
> Do I IPL?

You could try to vary off the line than vary on with the RESET
parameter set to *YES. For the IOP card, it is the same thing that
doing an IPL.

>
> Tia
> Max




Cordialement/Best regards
Marc Rauzier

Opinions I stated here are my own.