Re: Client Access Session Drops

Sorry didn't ask before, is the telnet "keep alive" parm
set at 900 seconds (15 minutes)? (default)
You can set this to a large number.
Downside is that if a pc does drop off, session will be active.
can't have it both ways.
Unfortunately this setting is for "all" telnet.
jim

----- Original Message -----
From: "John Taylor" <jtaylor@rpg2java.com>
To: <midrange-l@midrange.com>
Sent: Tuesday, September 04, 2001 4:47 PM
Subject: Re: Client Access Session Drops


> Routers are all the same Cisco model. WAN is online 24/7, and is a
monitored
> service. Devices are active for the duration of your typical 8 hour
workday.
> The most recent incident occurred this past Sunday, when the user was the
> only one on the system, so the number of active devices doesn't appear to
be
> a factor.
>
> Ethernet & TCP across the board. Server is currently at V4R5, but I seem
to
> recall it beginning way back with V4R2. Clients are all CA/Express with
> current service packs, but the versions vary from V4R4 to V5R1. Client
OS's
> include W95, 98, NT and 2K.
>
> When a session is dropped, the host job remains active with no message or
> other indication that anything went wrong.
>
> I'd call this in to IBM support, but my experience with them is that it's
> pointless to do so unless you can provide them with a reproducible test
> case.
>
>
> John Taylor
>
> ----- Original Message -----
> From: "Jim Franz" <franz400@triad.rr.com>
> To: <midrange-l@midrange.com>
> Sent: Tuesday, September 04, 2001 11:34
> Subject: Re: Client Access Session Drops
>
>
> > depends on how often the devices are active, and since it sounds like
> > multiple routers, would not suppose they are all the same.
> > have to ask - is this ethernet all the way, or are there sna controllers
> > involved (requires some change to controller config for WAN vs LAN
> settings.
> > Also, what OS Version?
> > jim
> >
>
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>