Re: Transferring Spool Files from AS400

Hi Rick,

I'm surprised changing the font and the orientation doesn't work.  Is it
possible you have trailing spaces on each line causing the wrapping?  I
wouldn't mind taking a peek if you'd like to send it to me off line
(pcdow@yahoo.com).

hth,
Peter Dow
Dow Software Services, Inc.
909 425-0194 voice
909 425-0196 fax

----- Original Message -----
From: <RickCarter@holley.com>
To: <MIDRANGE-L@midrange.com>
Sent: Friday, June 22, 2001 9:34 AM
Subject: RE: Transferring Spool Files from AS400


>
> I appreciate the information sent in on this question but..........
> I haven't had any problem getting the 156 byte spool file down to my PC,
> the problem is when it gets there, being able to print it without it
> wrapping.   I realize when viewing this document via email, it remains in
> the original report format but if you try to send it to a printer, it has
> trouble condensing the print to fit on a single page as it was originally
> generated.   IF you use Notepad or Wordpad to open the document, they
don't
> allow you to print with a condensed mode.  Changing the font or % doesn't
> help the wrapping issue.   Changing to Landscape and Scaling to Fit the
> paper still doesn't change the actual printing in this case.   I would be
> glad to send a sample of this document to someone offline from the mail
> list .     thanks
>
>
>
>                     Jim Damato
>                     <jdamato@dollargene        To:
"'MIDRANGE-L@midrange.com'" <MIDRANGE-L@midrange.com>
>                     ral.com>                   cc:
>                     Sent by:                   Subject:     RE:
Transferring Spool Files from AS400
>                     owner-midrange-l@mi
>                     drange.com
>
>
>                     06/21/01 06:32 PM
>                     Please respond to
>                     MIDRANGE-L
>
>
>
>
>
> > The other method was I used the CPYSPLF command and copied the spool
file
> > to a 156 byte length data file and then use Client Access to copy to the
> > PC.
> > Basically, from here, the same results are gotten when attempting to
> print.
>
> I've had better luck with this stuff when I've used CPYSPLF to a data file
> and copied the data file to a folder using CPYTOPCD TRNFMT(*TEXT) or
> CPYTOSTMF ENDLINFMT(*CRLF).
>
> -Jim
>
> James Damato
> Manager - Technical Administration
> Dollar General Corporation
> <mailto:jdamato@dollargeneral.com>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---
>
>
>
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---



_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---