RE: Is the 5034 Migration Tower I my existing 620 box?

[Diana Hicks <DianaH@xxxxxxxxxxxxx>]

Thanks to both of you for answering my question.

------------------------------

Date: Fri, 11 May 2001 15:34:50 +0200
From: "Leandro, Cesar" <Cesar.Leandro@avnet.com>
Subject: RE: Is the 5034 Migration Tower I my existing 620 box?

Towers and Racks 265
#5034 Migration Tower I (10 Disk S20/620, 720 System)
The #5034 is a converted Model 620, S20, or 720 (with only 10
possible internal CEC disk unit positions) system unit tower and
any existing #5064 or #9364 expansion unit, used for migration of
existing PCI/SPD cards, existing disk units, and existing
removable media devices, along with any attached PCI/SPD
towers. Additional "pre-V4R5" features may be ordered to use
vacant card or device slots in the converted CEC and expansion
unit and in any attached PCI/SPD tower. "V4R5 only" feature
cards and internal devices are not allowed in the converted CEC
tower, the expansion unit, or any of the attached PCI/SPD towers.
This feature is for migration upgrade purposes only and cannot be ordered
separately.
The #5034 can only attach to Models 820 and 830.
There is a maximum of one #5034 on a Model 820 and 830.
#5034/#5035 Migration Tower I

Attaching additional PCI/SPD towers to the #5034 after migrating to the
Model 820 is not
allowed.
Select any two of these HSL cable features for this tower:
* #1460 - 3m Copper HSL cable
* #1461 - 6m Copper HSL cable
* #1462 - 15m Copper HSL cable
The #1462 15m HSL cable can only be used on HSL port A0 of the Model 820 to
directly
connect a #5033, #5034, or #5035 Migration Tower I.
Select one of these SPCN cables:
* #1463 - 2m SPCN cable
* #1464 - 6m SPCN cable
* #1465 - 15m SPCN cable
* #1466 - 30m SPCN cable
The existing system unit/CEC line cord should be used. Available line cord
options are
identified in the iSeries and AS400e System Builder, SG24-2155.
The #5034 is mutually exclusive with #5033, #5035, and #5077.

Is this of any help?

César

Date: Fri, 11 May 2001 10:05:50 -0400
From: Pat Barber <mboceanside@worldnet.att.net>
Subject: Re: Is the 5034 Migration Tower I my existing 620 box?

Well .... here is what the sales manual says about that:
#5034) Migration Tower I

                    #5034 is a converted Model 620, S20, or 720 system
unit (along with
                    any attached #5064 or #9364 expansion unit), used
for migration of
                    installed PCI/SPD cards, up to ten installed
removable media devices,
                    and any attached PCI/SPD expansion units when
upgrading to a Model
                    820 or 830. One #5034 tower is included with the
model upgrade.
                    Additional existing features may be ordered to
utilize vacant space in this
                    tower, or in any attached PCI/SPD tower. New 8XX
model features
                    cannot be installed in this tower, nor in any of the
attached PCI/SPD
                    towers. Additional PCI/SPD towers cannot be attached
to the #5034
                    after the model upgrade. 

                    One 6-meter JTAG-E cable is included with the #5034.







Diana Hicks
Town of Jupiter
dianah@jupiter.fl.us


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---