Re: % temp addresses = 96.800

[MacWheel99@xxxxxxx]

We are on RISC & the problem does not go away with RISC.

It only goes away by paying attention to various warnings on the system, like 
you are doing, and by periodically studying DSPJOBTBL & other clues to see 
what is normal for your reality & making performance tuning so you not using 
excess stuff.

For you to get to 96.8 % SURPRISE tells me that either: 
no one paying attention while it climbed, or
you are under gassed for what you using your system for, or
you have periods of serious churning of system resources other than time 
period involved in your review of WRKSYSSTS which is only good for the time 
period YOU personally accessed it then accessed it again, not for the total 
overall system.
You might ask whoever signs on first thing in work day to visit this first 
thing, then revisit when their day is over ... those statistics would be a 
lot more meaningful.

Elapsed time . . . . . . :   00:00:00 
means the data you shared is practically worthless for making any judgements.

>  Seeing "Nearly all available machine addresses used." (CPI0997) in
>  the QSYSOPR message queue, 
> I am currently looking at a WRKSYSSTS screen on our
>  9406-D60 (running V3R2):
>  
>  The second level text for the message recommends that we "Do an initial
>  program load (IPL) to make more addresses available to the system.  The IPL
>  will automatically release available addresses to the system."
>  
>  We rarely IPL this box (or any of our boxes for that matter), only once in 
> the 6 months I've been here.

>  So, I guess we'll do an IPL this evening.  
>  Can anybody tell me what causes the temp addresses to get this high?  
>  BTW, I understand that this problem goes
>  away with RISC, and we are close to upgrading to new boxes.
>  
>  Dan Bale


MacWheel99@aol.com (Alister Wm Macintyre) (Al Mac)
AS/400 Data Manager & Programmer for BPCS 405 CD Rel-02 mixed mode (twinax 
interactive & batch) @ http://www.cen-elec.com Central Industries of 
Indiana--->Quality manufacturer of wire harnesses and electrical 
sub-assemblies - fax # 812-424-6838

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---