RE: LPAR remote console

["paats, marc" <paats_marc@xxxxxxx>]

There is an option in Client access called Operation Console and is
described in the manual SC41-5508. With this you can control the front panel
from the PC. If you then install a remote control program for the PC you can
remotely control the Primary LPAR.
If you want to control the secondary LPAR's you can do that from SST from
any monitor that is connected to the primary LPAR. There you can set the
LPAR to manual mode, restart, d-ipl, re-assign tape IOP's etc..


-----Original Message-----
From: Carley, Neil [mailto:carleyn1@Midas-Kapiti.com]
Sent: Friday, March 23, 2001 8:23 AM
To: 'MIDRANGE-L@midrange.com'
Subject: RE: LPAR remote console


Jeffrey,

Firstly thanks for your reply.

        Can you be more specific on your needs ??

Hopefully !!

Currently each partition on the new system has its own Twinax attached
system console, and therefore to carry out any work that requires a
restricted condition (such as ending all subsystems to do a savsys) requires
sombody signed on to the system console at our head office. What I want is
to be able to have system console ability/control including control of the
control panel functions from my site (30 miles away) over the WAN somehow.
I believe you can somehow setup remote control of an AS/400's system console
but I'm not sure if you can do it to an actual partition.

thanks again

Neil 
  
 

> -----Original Message-----
> From: Jeffrey Silberberg [SMTP:jsilberberg@mindspring.com]
> Sent: Thursday, March 22, 2001 8:50 PM
> To:   MIDRANGE-L@midrange.com
> Subject:      Re: LPAR remote console
> 
> Neil,
> 
>             I am not sure what you are asking here !  Any interactive
> session can be a console as long as you sign on with the proper security.
> For normal activity.
> 
>             For Restricted mode and LPAR work from the LPAR 0 partition
> you
> would need more..
> 
>             Also, your IP routing is going to be different, as each
> partition is a SYSTEM.
> 
>             Can you be more specific on your needs ??
> 
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---