× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Thanks for the warning, Pat.  I've got QSECOFR, so I can get in, but I'll 
remember to be very careful.  My feeling is that this is something I should 
know, so I'm going to have to try it, but I'll go VERY CAREFULLY <smile>.

Joe

---------- Original Message ----------------------------------
From: Pat Barber <mboceanside@worldnet.att.net>
Reply-To: MIDRANGE-L@midrange.com
Date: Tue, 27 Feb 2001 15:32:17 -0500

>Joe, the command is strcmntrc and requires QSECOFR or QSRV 
authority. You will need to STRSST so that you may end the
trace properly. This assumes the line is up and somthing is
coming through during the trace. You might want to read up
prior to running the trace.....

STRSST also requires authority that you may or may not have,
so again, reading up on the subject is the only way. SST is
a fairly risky place to be, so don't go without a manual.

I don't have any manual numbers in front of me at the moment.

To get a "very" basic reading, prompt on strcmntrc and place the
cursor on strcmntrc and press help.... It goes into a little 
detail of what is required. When I can find the correct manual
I'll post the number and name.

Joe Pluta wrote:

> No, only because I don't know how to do it.  Would you (or anybody listening 
>in on my travails) have a simple step-by-step explanation of the procedure?  
>If it requires SST, please don't assume I know how to fire it up - it's been a 
>long time since I used SST.
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.