The 351 says "System file cannot be read from diskette. Use the SRC on the LCD display to identify the problem." Are you sure you haven't missed some numbers on the 00124 side (or missed some spaces)? I don't see that error. Have you tried your backup diskette? I don't have a feel for your setup here. You have a remote Cisco router at the branch which you can ping. Are the router, controller, UPS, and PC all plugged into a hub? Chuck Lewis wrote: > > Hi folks, > > Got a "strange" one. We have a Perle 494 Control Unit with the Ethernet > card in it running TCP/IP over frame back to our AS/400 (using this at 8 > remote locations). Was working FINE until about 2 hours ago. It has a > error message of > 351 || 00124. > > They have tried rebooting the thing multiple times. It reads the > diskette and then does it's usual fumbling around and eventually > displays this message. > > I can ping the router fine (Cisco). > I can ping a UPS fine (APC UPS with SNMP Web card in it - really slick > !) > I have one PC that is attached via TCP/IP and IT is fine (running > Synapse software). > > I've got a message into Perle but have been waiting for SOME time now. > > Any ideas ? > > Thanks ! > > Chuck +--- | This is the Midrange System Mailing List! | To submit a new message, send your mail to MIDRANGE-L@midrange.com. | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com. | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com. | Questions should be directed to the list owner/operator: firstname.lastname@example.org +---
As an Amazon Associate we earn from qualifying purchases.
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.