Re: Client Accesss Session/Job Name

[nina jones <ddi@xxxxxxxxxxxxxxxxx>]

> 
> Up to now, getting a virtual device name QPADEVxxxx was not a problem.
> Now, I would like to assign specific session name to specific
> workstation.
> 
> I've tried to change the 'Workstation ID' parameter on the 'Configure
> PC5250' panel of CA but with no success. I still get a QPADEVxxxx
> session name when I connect to the AS400 using TCP/IP.
> 
> When I connect through NS Router, I get the workstationname I assigned
> in the configuration steps.
> 
> What am I missing? Is it that connecting through TCP/IP, I am at the
> mercy of the AS/400?


are you connecting to a v3r2 (or v3r7) machine?  

if so there are some ptf's you need to install on the as/400.  you used
to find them on the client access web page, but i haven't checked for a
year or so.

nj
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---