• Subject: Re: File cross-reference for Query/400
  • From: "Carsten Flensburg" <flensburg@xxxxxxxxxx>
  • Date: Wed, 15 Nov 2000 17:49:43 +0100
  • Organization: Novasol Data AS


I've written an RPG/IV version of the RTVQRYF MI program and added some more
offsets and structures. It still only works at security level 30 or below or
patched to system state. If you're interested you can have a copy of the
source as a starting point for you own modifications.

Best regards,
Carsten Flensburg

----- Original Message -----
From: <owner-midrange-l@midrange.com>
To: <MIDRANGE-L@midrange.com>
Sent: Wednesday, November 15, 2000 5:04 PM
Subject: Re: File cross-reference for Query/400

Hi, just about three weeks ago I posted a very similar question.
I had been doing some research and thought QQQQRY API could help me, but
not find the way to "read the Query Definition Template" (from then on, the
would be easy...), but got some answers that clearly showed that what I

                         "CAN'T BE DONE... "

I then contacted some one in Rochester, and the answer I got was the same:
be done.

Two people from this same list answered with two different alternatives:
- one, do a DMPOBJ of the *QRYDFN, then copy its spool file to a physical
then process it with a (RPG) program. Template format should become quite
easy to
decipher using the QDT from QQQQRY API as a guide. Not too good if you got,
as I
did, quite a large number of queries to process...
- second, I was redirected as follows:
        "Go to www.as400network.com.  Search for article by Gary Guthrie in
          March 1997, page 117 entitled "Determining Query Specifications".

          describes an MI program to retrieve the query file information.
          download the code.  I believe you must be a member to access the
          article and code.

   I am not a MI expert, but looked for it anyway, and it is true you need
to be
a "Proffesional member" to even read the article, and to access its source
and I could not afford the cost of it for just this one case...

So, unhappily enough, I ended up with no acceptable solution...
If you happen to be more lucky than I was, I'd appreciate you input.
Best regards, Antonio

Lou Forlini escribió:

>     I have a client that has close to 1000 Query/400 objects, and
> needs to get a file cross-reference listing for them. As far as I can
> tell, DSPPGMREF won't do it, is there anything out there that can?
> Roll-your-own and commercial solution suggestions welcome.
>     Regards,
>     - Lou Forlini
>       Software Engineer
>       System Support Products, Inc.
> +---
Antonio Fernandez-Vicenti

| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2020 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].