RE: Netserver and MS WinME - conflict?

[Chris Bipes <chris.bipes@xxxxxxxxxxxxxxx>]

Sounds like NetServer is running, if the other PC can see and access.  Is
the new PC running in the same subnet?  Have you configured WINS in the
WinME PC, as well as NetServer?  NetServer is not windows and does have some
quirks with Win2000 and apparently WinME.


Christopher K. Bipes    mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst  mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.        http://www.cross-check.com
6119 State Farm Drive   Phone: 707 586-0551 x 1102
Rohnert Park CA  94928  Fax: 707 586-1884

If consistency is the hobgoblin of little minds, only geniuses work here.
Karen Herbelin - Readers Digest 3/2000

-----Original Message-----
From: Jerome Draper [mailto:jdraper@wco.com]
Sent: Tuesday, November 07, 2000 8:54 PM
To: MIDRANGE-L@midrange.com
Subject: Netserver and MS WinME - conflict?


I have tried to configure NetServer on a new Dell box loaded with Windows
ME.  NetWork Neighborhood (sic) can't see the AS400 but can see other PC's
on the same LAN in the same workgroup.  These other PC's can see the AS400
in their Network Neighborhood (mix of Win95 and Win98).  I logged on to
WinME with a valid AS400 signon, verified that it had not been nixed by
NetServer, and made sure both the LMHOSTS and HOST files had an entry for
the AS400 Q<systemname> as reported by the utility that started NetServer
on the AS400.  QSERVER is running as is the WRKACTJOB QZ<something> that
shows that NetServer is running.  Nothing on the NetServer web pages.
System is on V4R3 and only CA/400 for Win95/NT is loaded -- not CAE.

Help.  How can I get NetServer running?  My guess is that I need CAE or
that there is a bug in WinME compatibility with NetServer as PTFed on this
system.

TIA,


Jerry
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---