RE: 4234 Printer

[ddetz@xxxxxxxxxxxx]

Update.... when I send the file sndnetsplf - it prints..  when  it sends via our auto remote outq's it doesn't  print....  we are printing 10 cpi; 66 length; 132 wide; 6 lpi.     We print a ton of other things via remote outq -- The printers are the same model.  They are configured exactly the same. 

-----Original Message-----
From: Al Barsa, Jr. [mailto:barsa2@ibm.net]
Sent: Tuesday, July 18, 2000 7:23 AM
To: MIDRANGE-L@midrange.com
Subject: Re: 4234 Printer

At 09:41 AM 7/18/00 -0400, you wrote:

Sounds like, and I'm making a lot of assumptions here, you are doing 15 cpi printing.  The 4234, when set properly, will switch back and forth from 10 cpi to 15 cpi as appropriate.  (It's been over 12 years since I used one.)

It should not terminate is the settings are not appropriate.  It should either send a message, or print in the wrong cpi.  As this printer is really not current technology, it likely doesn't have IBM's focus, and it sounds like a bug to me.  Keep in mind that this printer came out on the System/38.  (BTW, I think that it was/is a wonderful printer.  Today I no longer use any tractor based printers.)

Al

We have a JDE simple Accounting report that we are printing out.  We send it system1 that has a 4234 printer attached to it to print - it prints.  But when we send it to system2 that has the same  type of printer - 4234 - attached it automaticly ends.  Why? 

The configuration on both systems are identicle.  Is there some kind of hardware physical configuration on the printer that I could change?  TIA

Dawn L. Detz

System Administrator

Zinc Corporation of America

300 Frankfort Road

Monaca, PA  15061-2295

ddetz@zinccorp.com

+--------------------------------------------------+

| Please do not send private mail to this address. |

| Private mail should go to barsa@ibm.net.         |

+--------------------------------------------------+

Al Barsa, Jr. - Account for Midrange-L

Barsa Consulting, LLC.  

400 > 390

Phone:          914-251-1234

Fax:            914-251-9406

http://www.barsaconsulting.com

http://www.taatool.com