× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



First update the OS.  When done, do the DASD & Memory.  Have IBM do the hardware side.  Your CE should be able to tell you about your Mirror/RAID.
 

Christopher K. Bipes     mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst   mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.         http://www.cross-check.com
6119 State Farm Drive    Phone: 707 586-0551 x 1102
Rohnert Park CA  94928 Fax: 707 586-1884

If consistency is the hobgoblin of little minds, only geniuses work here.  Karen Herbelin - Readers Digest 3/2000

-----Original Message-----
From: oludare [mailto:oludare@ix.netcom.com]
Sent: Friday, July 14, 2000 1:27 PM
To: AS/400 Midrange Usergroup
Subject: AS/400 UPGRADE

Hi guys,
 
Is there a painless way to find out if my AS/400 DASD is in MIRROR or RAID mode. 
I am upgrading my DASD from 42 to 84 Gig, MEMORY from 512MB to 1Gig, and the OS400 from V3R7 to V4R3.  What should be my step by step plan to accomplish this upgrade.  Is there any reliable sources out there that gives the detail plan for this upgrade.  I have checked BOULDER and some other sites but to no success.
 
HELP !
 
Dare

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.