RE: Client Access - Black Display screen

[Chris Bipes <rpg@xxxxxxxxxxxxxxx>]

Is your telnet server running on the AS400?  Look for job QTGTELNET in
subsystem QSYSWRK or use ops nav / network / servers / tcpip and check the
status of the telnet server.  Two, have you configured telnet to auto-create
devices or have you manually created them?  Are they varied on?

Hope this helps,


Christopher K. Bipes     mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst   mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.         http://www.cross-check.com
6119 State Farm Drive    Phone: 707 586-0551 x 1102
Rohnert Park CA  94928 Fax: 707 586-1884

*Note to Recruiters
Neither I, nor anyone that I know of, is interested in any new and/or
exciting positions. Please do not contact me.


-----Original Message-----
From: Gallagher, Debbie (CA - Toronto) [mailto:dgallagher@deloitte.ca]
Sent: Tuesday, January 04, 2000 9:24 AM
To: Midrange List (E-mail)
Subject: Client Access - Black Display screen


My next problem in the ongoing saga of my first AS/400 install. I've spent
the entire morning poring over manuals to try and figure out what I've
missed. However, can't figure it out, so am hoping one of you will be able
to tell me what to try.

The AS/400 is a 720 running V4R3. Installed Client Access on an NT system on
the same LAN. Can PING to other servers on the LAN from both the NT and the
AS/400.

Got the AS/400 connection working on the NT. Well, partly, and that's the
problem. I can used Ops Nav. I can Transfer Data from AS/400 and display it
on the NT. 

However, when I try to use PC5250 emulation, I get just a black screen. The
bar across the top of the window shows session A. When I first try to start
the session, the blue markings in the two bottom corners flash briefly, then
go black. So, I'm left with the lovely icons on the top and the blue line on
the bottom. 

Any ideas what I've done wrong?

Debbie Gallagher
dgallagher@deloitte.ca
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---