Re: PPP dialup and IP numbers

[Jim Langston <jlangston@xxxxxxxxxxxxxxxx>]

It sounds like a netmask problem to me.  What is the netmask
on the PC and the AS/400?  You put the netmask after the IP
address of the PC in DUN.

Regards,

Jim Langston

Jerome Draper wrote:

> There is no place to put in a mask.  On the OOPs Nav you put in the IP addr
> of the AS400 (local) and of the PC (remote).  On the PC in DUN you put in
> the IP addr of the PC (matching the PPP remote on the AS400).  Once
> connected the client (Synapse NetWolf) has the IP addr of the AS400.
>
> Jerry
>
> At 09:04 PM 12/13/1999 -0500, you wrote:
> >Jerry, what are you using for a mask?  255.255.255.0?
> >
> >_______________________
> >Booth Martin
> >boothm@earth.goddard.edu
> >http://www.spy.net/~booth
> >_______________________
> >
> >
> >
> >
> >Jerome Draper <jdraper@wco.com>
> >Sent by: owner-midrange-l@midrange.com
> >12/13/1999 08:19 PM
> >Please respond to MIDRANGE-L
> >
> >
> >        To:     midrange-l@midrange.com
> >        cc:
> >        Subject:        PPP dialup and IP numbers
> >
> >I got the RS232 com port on a mod 170 configured for PPP dialup via OOPS
> >NAV (thanks everyone).  The com port on the AS400 is 192.168.1.111 and the
> >PC I'm using for dialup is 192.168.1.110.  Strangely, it doesn't work but
> >when I change the AS400 com port to 1.1.1.1 and the PC to 1.1.1.2 it works
> >fine.
> >
> >What gives?
> >
>
> Jerry Draper, Trilobyte Software Systems, since 1976
> Specializing in connecting PC's, Windows, MAC's, and LAN's to the AS/400
> Representing Synapse, Apple, IBM, UDS, Nlynx, MI, Perle, Netsoft, etc.
> (415) 457-3431; (415) 258-1658fax; jdraper@wco.com
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---