Re: PPP dialup and IP numbers

[Jerome Draper <jdraper@xxxxxxx>]

There is no place to put in a mask.  On the OOPs Nav you put in the IP addr
of the AS400 (local) and of the PC (remote).  On the PC in DUN you put in
the IP addr of the PC (matching the PPP remote on the AS400).  Once
connected the client (Synapse NetWolf) has the IP addr of the AS400.

Jerry

At 09:04 PM 12/13/1999 -0500, you wrote:
>Jerry, what are you using for a mask?  255.255.255.0?
>
>_______________________
>Booth Martin
>boothm@earth.goddard.edu
>http://www.spy.net/~booth
>_______________________
>
>
>
>
>Jerome Draper <jdraper@wco.com>
>Sent by: owner-midrange-l@midrange.com
>12/13/1999 08:19 PM
>Please respond to MIDRANGE-L
>
> 
>        To:     midrange-l@midrange.com
>        cc: 
>        Subject:        PPP dialup and IP numbers
>
>I got the RS232 com port on a mod 170 configured for PPP dialup via OOPS
>NAV (thanks everyone).  The com port on the AS400 is 192.168.1.111 and the
>PC I'm using for dialup is 192.168.1.110.  Strangely, it doesn't work but
>when I change the AS400 com port to 1.1.1.1 and the PC to 1.1.1.2 it works
>fine.
>
>What gives?
>


Jerry Draper, Trilobyte Software Systems, since 1976
Specializing in connecting PC's, Windows, MAC's, and LAN's to the AS/400
Representing Synapse, Apple, IBM, UDS, Nlynx, MI, Perle, Netsoft, etc.
(415) 457-3431; (415) 258-1658fax; jdraper@wco.com
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---