Re: Missing Load Source

[Jessica Miller <tealem@xxxxxxx>]

Hi Lou,

Thanks for the reply.  I must be missing something in DST, because I can't find
anywhere to do this.  Also, what could have caused them to be 'un-added' if the
machine has been working fine until the IPL?  I checked both DST password/id
combos (they are still set to 1 and 2's) and neither option gave me anything 
more
then save, copy, analyze, etc, with the disk units, but nothing to actually work
with them like you get in SST.

Jessica

Lou Schmaus wrote:

> Jessica,
>
> Just off the top of my head(I'n not near a /400 or manuals), I think you
> need to add all the disk units to ASP 1 first.
>
>  Do the D M IPL, Work with Disk Units at the DST menu, add the disks to ASP,
> and then continue with install of OS400.
>
> HTH,
>
> Lou Schmaus
> CReative Compute Associates, Inc.
> Jackson, NJ 08527
> lschmaus@link400.com
>
> ----- Original Message -----
> From: T. Jessica Miller <tealem@wrq.com>
> To: <MIDRANGE-L@midrange.com>
> Sent: Wednesday, November 24, 1999 8:17 PM
> Subject: Missing Load Source
>
> > Hi Everyone,
> >
> > I need some suggestions on a problem I am having. I have an old 40S that I
> am
> > reinstalling (DM IPL then 2 to reinstall and initialize from V3R7 CD's)
> and am
> > not able to get it going.  After selecting option 2, it goes for about a
> minute
> > (the percentage done stays at 0%) and then gives me a SRCB6005120.  I am
> able to
> > boot to DST and selected to Analyze the disk units and got a warning that
> the
> > Load Source Disk Unit could not be found.  Plus all my drives read as
> > non-configured here which seems bad.
> >
> > If I try to do a BM IPL I can't get to DST and get a SRCB1014505.  This
> happens
> > on any other IPL than a DM (off tape or CD).  I even tried one of my
> savstg
> > tapes.
> >
> > This system was up and running about a week ago...until I IPL'd.
> >
> > Any ideas?
> >
> > Thanks so much,
> >
> > Jessica
> >
> > --
> > T. Jessica Miller
> > WRQ Technical Engineer
> > WRQ Inc, Makers of Reflection and Express Software
> >
> >
> > +---
> > | This is the Midrange System Mailing List!
> > | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> > | Questions should be directed to the list owner/operator:
> david@midrange.com
> > +---
> >
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---