RE: TCP/IP Printing - HP Products (Was HP4000 Printing - Font Size)

I called Support Line after a kind reminder from "Don in DC". They pointed
me at a couple docs at this location:
http://www.as400service.ibm.com/supporthome.nsf/home/Software+Knowledge+Base
under Print and Workstation Customizing Objects. #8694253 COR (Computer
Output Reduction) Font Control, and #8692422 Instructions for Modifying a
Workstation Customizing Object (WSCST). I have not done anything with this
yet as it was a back-burner issue. Hope it helps you. By the way, Support
Line then informed me this would be a Consult Line project (and charge) if
they needed to do anything more.

Bob

> -----Original Message-----
> From: owner-midrange-l@midrange.com
> [mailto:owner-midrange-l@midrange.com]On Behalf Of Bill Paris
> Sent: Wednesday, August 18, 1999 12:33 PM
> To: MIDRANGE-L@midrange.com
> Subject: TCP/IP Printing - HP Products (Was HP4000 Printing - Font Size)
>
>
> Hey Bob, you're right. We're using an HP5Si over here converted
> from Twinax
> to TCP/IP and the control panel settings don't change anything. Has anyone
> managed to fix this snafu?
>
> This is wierd...
>
> Bill Paris
> Sorrento Cheese Co., Inc.
> 716-823-6262 x376
>
> ------------------------------------------------------------------
> ----------
> -----
>
>
> Thanks, but I tried that and had no luck. Maybe my AS/400
> definition causes
> some kind of override? In fact, the default orientation is
> portrait, and the
> print still comes out landscape.
>
> Thanks for the thought,
> Bob
>
> > -----Original Message-----
> > From: owner-midrange-l@midrange.com
> > [mailto:owner-midrange-l@midrange.com]On Behalf Of Bill Paris
> > Sent: Wednesday, August 04, 1999 7:22 AM
> > To: MIDRANGE-L@midrange.com
> > Subject: RE: HP4000 Printing - Font Size
> >
> >
> > Bob, the default font size can be changed via the control panel
> "printing
> > menu". There is alot of neat stuff you can change from there...
> >
> > Bill Paris
> > Sorrento Cheese Co., Inc.
> > 716-823-6262 x376
> >
> >
> > -----Original Message-----
> > From: owner-midrange-l@midrange.com
> > [mailto:owner-midrange-l@midrange.com]On Behalf Of Bob Randall
> > Sent: Tuesday, August 03, 1999 5:14 PM
> > To: MIDRANGE-L@midrange.com
> > Subject: HP4000 Printing - Font Size
> >
> >
> > I have an HP4000 printing using TCP/IP, and I love it! I have not
> > been able
> > to change the font though, and it defaults a little too small.
> I have not
> > had any luck at adjusting the size. Am I banging my head against
> > a wall, or
> > can you change the font size?
> >
> > TIA,
> > Bob Randall
> > Airxcel, Inc.
>
> ------------------------------------------------------------------
> ----------
> ----
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
> david@midrange.com
> +---
>


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---