RE: Help with TCP-IP for V4r3

[Chris Bipes <ChrisB@xxxxxxxxxxxxxxx>]

Is your telnet server running?  WRKTCPSTS *CNN and look for telnet/port23
listing.  
If it is not running, STRTCPSRV *TELNET.  This should start the server for
you.  Look in subsystem qsyswrk for the following: QTGTELNETS

     QSYSWRK        QSYS        SBS      .0                   DEQW  
       QTGTELNETS   QTCP        BCH      .0                   DEQW  
       QTGTELNETS   QTCP        BCH      .3                   DEQW  
       QTGTELNETS   QTCP        BCH      .0                   DEQW  

This is the telnet server.  If all that is up and running and you still
can't get a telnet session look for controller QPACTL01 varied on and
active.  This runs the devices QPADEV*.  Do you have them configured or
autoconfigure turned on?  There are lots of little pieces to get telnet up
and running.  Mocha works.  I use it.


Christopher K. Bipes            mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst          mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.                http:\\www.cross-check.com
6119 State Farm Drive           Phone: 707 586-0551 x 1102
Rohnert Park  CA  94928         Fax: 707 586-1884



-----Original Message-----
From: slew@accessone.com [mailto:slew@accessone.com]
Sent: Tuesday, June 15, 1999 2:27 PM
To: MIDRANGE-L@midrange.com
Subject: Help with TCP-IP for V4r3




Hi:


We have a 600 box with V4R3 and a small lan.


I can ping the lan from the as400 and can ping the as400 from the lan.

I am unable to telnet--i tried mochasoft's client on port 23 where the as400
indicates its listening.

Any ideas?

Thanks

Bob

slew@accessone.com



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---