Re: Configuring AS/400 to dial out

Albert:
You are correct, I wasn't near a machine to verify the command.  Anyway, I
have set it up for a few clients and it is pretty straight forward.  Do you
have the TCP/IP config manual.  There is a pretty good explaination of how
to set it up in there.  Off the top of my head here is a very quick overview
of exactly what needs to be done.
1. You dont need to config TCP/IP on the AS400.
2.  You need to define a ASYNC line defn for the AS400.
3.  We have used US Robotic modem with dial up TCP and they work well.
4.  Use option 1 from the CFGTCPPTP menu.  I don't have access to any of the
AS400 I have set this up on at this time, but that should be about all there
is to it.

Are you using PPP or SLIP?  I have set up the 400 to call another AS400 via
SLIP and have PCs dial into a 400 via SLIP, but not actually act as a router
between 2 networks.  I believe you need to all fowarding of IP packets (I
dont remember the keyword).  Also, you will need to define a route between
your network and the remote network.

Sorry I'm not that much more help.
Carl Galgano

EDI Consulting Services, Inc.
540 Powder Springs Street
Suite C19
Marietta, GA  30064
770-422-2995
mailto: cgalgano@ediconsulting.com
http://www.ediconsulting.com
EDI, Communications and AS400 Technical Consulting

-----Original Message-----
From: York, Albert <albert.york@nissan-usa.com>
To: 'MIDRANGE-L@midrange.com' <MIDRANGE-L@midrange.com>
Date: Saturday, January 16, 1999 12:32 PM
Subject: Configuring AS/400 to dial out


>I think you mean CFGTCPPTP, which I have done.
>
>This presents a menu but doesn't explain what steps are required. I have
>referred to the IBM literature but find it confusing. Following the
>directions as best I can has not resulted in success.
>
>What I would like is a list of the steps needed to set this up. I can fill
>in the details.
>
>
>> ----------
>> From: Carl Galgano[SMTP:cgalgano@ediconsulting.com]
>> Sent: Saturday, January 16, 1999 4:38 AM
>> To: MIDRANGE-L@midrange.com
>> Subject: Re: Configuring AS/400 to dial out
>>
>> <<File: Carl J. Galgano.vcf>>
>> Look up point to point TCP, use the command CFGPTPTCP.
>> Carl Galgano
>> EDI Consulting Services, Inc.
>> 540 Powder Springs Street
>> Suite C19
>> Marietta, GA  30064
>> 770-422-2995
>> mailto: cgalgano@ediconsulting.com
>> http://www.ediconsulting.com
>> EDI, Communications and AS400 Technical Consulting
>>
>> -----Original Message-----
>> From: York, Albert <albert.york@nissan-usa.com>
>> To: 'Midrange mailing list' <MIDRANGE-L@midrange.com>
>> Date: Friday, January 15, 1999 8:41 PM
>> Subject: Configuring AS/400 to dial out
>>
>>
>> >I want to configure the AS/400 to connect to a RAS server and act as a
>> >TCP/IP gateway between a local LAN and the remote LAN. Can anyone tell
me
>> >how to configure this or where to look to find a straight forward
>> >explanation?
>> >
>> >Thanks.
>> >
>> >+---
>> >| This is the Midrange System Mailing List!
>> >| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>> >| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>> >| To unsubscribe from this list send email to
>> MIDRANGE-L-UNSUB@midrange.com.
>> >| Questions should be directed to the list owner/operator:
>> david@midrange.com
>> >+---
>>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
>| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
>| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator:
david@midrange.com
>+---

BEGIN:VCARD
VERSION:2.1
N:Galgano;Carl;J.
FN:Carl J. Galgano
ORG:EDI Consulting Services, Inc.
TEL;WORK;VOICE:770-422-2995
TEL;PAGER;VOICE:770-839-8168
TEL;WORK;FAX:770-425-8391
ADR;WORK;ENCODING=QUOTED-PRINTABLE:;;540 Powder Springs Street=0D=0ASuite C19;Marietta;GA;30064
LABEL;WORK;ENCODING=QUOTED-PRINTABLE:540 Powder Springs Street=0D=0ASuite C19=0D=0AMarietta, GA 30064
URL:
URL:http://www.ediconsulting.com
EMAIL;PREF;INTERNET:cgalgano@ediconsulting.com
REV:19990117T134638Z
END:VCARD