Tks Paul ,
for all those complete informations.
I will look forward in this direction.
I have also found  an other alternative which is a twinax gateway between
AS/236 and the Lan with  emulation software full 32 bit over IP (Nlynx
System). It gives Display , Printer and file transfer, but don't give sql
access to data.
Tks Again

Philippe

C.I.A it
Conseil Ingénierie Assistance
ORTHEZ FRANCE
ph.Boussaroque@cia-it.com


-----Original Message-----
From: owner-midrange-l@midrange.com
[mailto:owner-midrange-l@midrange.com]On Behalf Of Paul Tykodi
Sent: mardi 5 janvier 1999 05:06
To: 'Ph.boussaroque@cia-it.com'
Cc: 'midrange-l@midrange.com'
Subject: Re: What way to connect AS 236 system to NT 3.51 or 4 MS
Network without using SNA SERVER??


Dear Philippe,

The AS/36 model 236 consists of AS/400 RISC processor based hardware running
an updated version of the original S/36 operating system known as SSP.
Because of the underlying AS/400 based nature of an AS/36, you gain some
added capabilities that were not available on the original S/36. There is a
PRPQ available for the AS/36 model 236 known as the DOS Client for SSP PRPQ.
This PRPQ effectively adds Client Access/400 for DOS capabilities to your
AS/36 including the QPCSUPP subsystem. ..............


Best Regards,

/Paul
--
Paul Tykodi, Technical Director                 E-mail: pault@praim.com
Praim Inc.                                           Tel: 603-431-0606
140 Congress St., #2                                Fax: 603-436-6432
Portsmouth, NH  03801-4019

Date:   Fri, 27 Nov 1998 16:01:58 +0100
From:   "Philippe BOUSSAROQUE" <Ph.boussaroque@cia-it.com>
Subject:        What way to connect AS 236 system to NT 3.51 or 4 MS Network
without using SNA SERVER??

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2019 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].