Re: IPCS Woes

[Pete Massiello <pmassiello@xxxxxxxxxxxxxxxx>]

Jon,

  Make sure that you have a cable plugged into the ethernet port, and that this
cable is then plugged into a hub.  You should see a green light on the hub as 
well
as on the card.  You also want to make sure that you have enough memory in the
machine pool when you vary this on, as I have noticed the FSIOP/IPCS takes a 
lot of
memory from the machine pool.

HTH

Pete

Jon Paris wrote:

> Can anyone give me a hint here.
>
> I've configured the IPCS and done the VRYCFG on - once this completes the
> manual insists that the ethernet line should be happily varied on.  It isn't!
> If I try to vary it on it says I must use VRYCFG - and I've done that.  I 
>can't
> see any error messages in the log and don't know where else to look.
>
> This is V4R2 on a 170 configured to use TCP/IP over ethernet.
>
> Jon Paris - AS/400 AD Market Support - paris@ca.ibm.com
> Phone: (416) 448-4019   -   Fax: (416) 448-4414
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---



--
Pete Massiello
OS Solutions International
Phone: (203)-744-7854  Ext 11.
http://www.os-solutions.com
mailto:pmassiello@os-solutions.com


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---