× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: Questions on Netserver Support
  • From: Rob Berendt <rob@xxxxxxxxx>
  • Date: Mon, 27 Jul 1998 8:36:23 -0500

I've also seen problems in where I cannot see the shares on clients using both 
NT and Novell.  Based on your experience with this situation I am now tempted 
to call IBM on this again with this new information.

In general I've found the Netserver support to be shaky at best.




peteh@inwave.com on 07/26/98 06:03:43 PM
Please respond to MIDRANGE-L@midrange.com@Internet
To:     MIDRANGE-L@midrange.com@Internet
cc:      
Subject:        Re: Questions on Netserver Support

At 18:10 07/25/98 -0700, Jeff Silberberg wrote:
>
> I have the Netserver configured for a client, and all works well
> on the test machine, if CA/400 (router) is loaded but otherwise I can
> not see the shares I established. 
>
> The Client is confuged for both Win NT / and Novel client and uses the 
>IPX and TCP/IP protocols.  Do I also need to enable the Netbios here, or 
>can I enable this another way, either with IPX on the AS/400 or with some 
>option I am missing in the Win/95 configuration to just use IP. 

Jeff,

I found that as long as the NT network client was configured, I couldn't see 
the AS/400 shares. I suspect that it will work with the NT client also if the 
Novell client is removed, but Novell is our standard setup, so I didn't muck 
with it. It works fine with just the Novell client.

Pete


Pete Hall
peteh@inwave.com 
http://www.inwave.com/~peteh/

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.