At 06:04 PM 10/22/97 -0400, you wrote:
>>Date: Wed, 22 Oct 1997 09:53:06 -0500
>>From: Vern Hamberg <>
>>Subject: Re: Retrieve Dynamic IP Addresses via the QDCRDEVD API
>>A comment, lest anyone think this applies to WSG & LPD=97it doesn't. The WSG
>>does not use the same mechanism=97for the life of me, I can't see why
>>TELNET. But you can get the IP address for WSG clients from the WSG
>>log=97check TCP/IP Config & Ref, WSG chapter, for details. This works  only
>>so long as your signon screen matches the IBM default screen in the upper
>>10 lines or so. In other words, anything you add to customize the screen
>>must appear below the IBM default stuff.
>>Vernon Hamberg
>Actually, WSG can store the IP address similar to Telnet, where it can be
>retrieved via the QDCRDEVD API.  But you have to install a PTF to get the
>function.  The function was 'rolled up' into the following PTF's:
>SF43511  WSG_V3R2
>SF43509  WSG_V3R7
>SF43510  WSG_V4R1
>Jeff Stevens - AS/400 TCP/IP Applications (LPD/WSG/Telnet)

Ooooh! Awright!!!

Vernon Hamberg
Systems Software Programmer
Old Republic National Title Insurance Company
400 Second Avenue South
Minneapolis, MN 55401
(612) 371-1111 x480

| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "".
| To unsubscribe from this list send email to
|    and specify 'unsubscribe MIDRANGE-L' in the body of your message.
| Questions should be directed to the list owner/operator:

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2020 by and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].