Frank At 09:32 AM 10/6/97 -0400, you wrote: > >On Mon, 06 Oct 1997 01:15:51 -0500 Vern Hamberg <firstname.lastname@example.org> >writes: >>Gary, >> >>>Frank, >> >>>We tried doing this however, I don't think its possible. We used the >>>same JetDirect card and finally just put the printers on separate >>cards. -snip- >>Do the different ports have different names? I've only heard of 'raw' (in >><italic>Printing III</italic> or <italic>Printing IV</italic> redbook), >>which worked for us. >Yes they have different names. In fact if you use NT & TCP/IP you >address >them using raw1, raw2, raw3 when you setup a printer. I don't know >how to do the equivalent on AS/400. I only know how to attach >a queue to an IP address. Thanks for the info. Seems it should be possible, then, to name the queues on the printer. The only gotcha is, you have to put them in as lowercase, so be sure to enclose the names in apostrophes when specifying them on the CRTOUTQ command: 'raw1', not raw1. The latter converts to uppercase and will not work. Cheers Vernon Hamberg Systems Software Programmer Old Republic National Title Insurance Company 400 Second Avenue South Minneapolis, MN 55401-2499 (612) 371-1111 x480 +--- | This is the Midrange System Mailing List! | To submit a new message, send your mail to "MIDRANGE-L@midrange.com". | To unsubscribe from this list send email to MAJORDOMO@midrange.com | and specify 'unsubscribe MIDRANGE-L' in the body of your message. | Questions should be directed to the list owner/operator: email@example.com +---
As an Amazon Associate we earn from qualifying purchases.
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.