Re: CA95 and 5394 WSC

>Two quick questions:
>
>1. At a site with a 5394 remote workstation controller, how do I
>assign twinax addresses for ports 1+ in CA95 with Netsoft router (port
>0 is devices 0-6, port 1 is 7-0D, etc)? For a person on port 1, switch
>9, do I use 2 for the twinax address? This seems to be correct, just
>want to verify. (In DOS PCS the line with the switch setting would say
>9, which also matches the device description on the 400.)
>
>2. Also with CA95 and 5394, I'm getting an error message along the
>lines of "AS400 license". It's error CBW06 I think. The help says the
>system name is incorrect or other problem, but everything's set up
>correctly. Any ideas?
>
>Only 3 people are using Win95+CA95 at this location. One set up
>without problems. Now this. (Third person out of office, can't do
>yet.)
>
>TIA,
>Loyd Goodbar



Addressing for a 5394 controller is as follows:


        Twinax
Port \  Address     0   1   2   3   4   5   6

  0                00  01  02  03  04  05  06
  1                07  08  09  0A  0B  0C  0D
  2                0E  0F  10  11  12  13  14
  3                15  16  17  18  19  1A  1B   <---  only on a 5294


Your example, Address 09 on Port 1 is switch setting 02 on the device.


--Paul E Musselman
PaulMmn@ix.netcom.com


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to MAJORDOMO@midrange.com
|    and specify 'unsubscribe MIDRANGE-L' in the body of your message.
| Questions should be directed to the list owner/operator: david@midrange.com
+---