Re: CA95 and 5394 WSC

In response to question 1: Yes, address 09 would be twinax address 2. We've
just installed several Perle 494 controllers (5494 equivalent), and the
addressing on the controller side is the hex equivalent of how many devices
are attached.

HTH,
Jeff

Jeff Velten, Operations Analyst
The AT-A-GLANCE Group - http://www.at-a-glance.com
Phone: (607) 563-9411 x679
Fax: (607) 563-8811



Two quick questions:
1. At a site with a 5394 remote workstation controller, how do I
assign twinax addresses for ports 1+ in CA95 with Netsoft router (port
0 is devices 0-6, port 1 is 7-0D, etc)? For a person on port 1, switch
9, do I use 2 for the twinax address? This seems to be correct, just
want to verify. (In DOS PCS the line with the switch setting would say
9, which also matches the device description on the 400.)



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to MAJORDOMO@midrange.com
|    and specify 'unsubscribe MIDRANGE-L' in the body of your message.
| Questions should be directed to the list owner/operator: david@midrange.com
+---