QESTELE Data Area

[peteh@xxxxxxxxxxxxxxxx (Pete Hall)]

In message <0000EB1C.3388@DOEGJPO.COM>, From Carol.Collins@DOEGJPO.COM 
(Carol Collins), the following was written:
> I have just replaced the IBM 5853 on our ECS line with a Motorola UDS 
> V.3400.  Following the instructions of Dave M. and others on this 
> list, I loaded option set 9.  Then I tried to use it, via the 
> SNDSRVRQS *TEST command.  It doesn't work. :(

Carol,

I found this in the archives:

------------------------------------------

To change the ECS modem telephone numbers, type:

        CALL QESPHONE

IBM modems might have "SST" before the telephone number.  If you are
using a modem such as Motorola UDS, remove the SST and leave the
telephone number.

Make sure that you leave the exact number of spaces within the quotes. 
If you delete SST, add 3 spaces to the right of the number (IBMs
suggestion).

The data area that is updated is QUSRSYS/QESTELE.

------------------------------------------

I remember fighting with this a few years ago too. Even RTFM didn't help
with this one. If the above doesn't solve the problem, just call
Motorola. I ended up doing that. They were very helpful, and had the
problem resolved on the spot.

Good luck
Pete


--
 - Pete Hall peteh@earth.inwave.com
http://www.inwave.com/~peteh/

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *