Re: TCP/IP and TELNET

[Carl Galgano <cgalgano@xxxxxxxxxxxxxxxxx>]

Danny:
We are using NI Print from Network Instruments.  You can find in on the WEb,
sorry I don't have the URL handy as I am on the road, and download a trial
for about 30 days.  It worked the 1st time and costs about $20/licence.
Carl

At 01:24 PM 5/24/97 -0500, Danny McQuestion wrote:
>Carl,
>
>       What LPR/LPD client do you run on your machines?  I forwarded a message
>to the group asking IBM about using Netware for SAA & HostPrint/400 to
>print to the clients.  This resolves a static versus dynamic IP
>addressing issue that I have.  That is if the application I outlined
>will work.
>
>Danny Mc?
>
>Carl Galgano wrote:
>> 
>> Scott:
>> Using telnet there is no support for a printer, so here are the options:
>> 1.  Continue to use the twinax attached printers as is.
>> 2.  Use a network attached printers (ie LaserJet 5 w/Jet Direct card), you
>> can then assign an IP address to each printer and create an outq on the
>> AS400 pointing that IP address.
>> 3.  Use printers attached to PC by using an LPD/LPR software on the PC.
>> Again you need to create an outq on the AS400 pointing to the IP address of
>> the PC.  The LPD software should be started at startup time and will direct
>> the spool file to the printer.
>> It all works pretty well.
>> Let me know if you need any details about any of the above.
>> Regards,
>
>-- 
>
>---
>Danny Mc?
>E-mail:    dcmcques@vantek.net
> or Click: mailto:dcmcques@vantek.net
>Web Page:  http://www.vantek.net/pages/dcmcques/index.html
>
>-----BEGIN PGP PUBLIC KEY BLOCK-----
>Version: 2.6.2
>
>mQCNAzF0vwQAAAEEANHAlvrDaRFM5J3H/OZCdfIMWDDmJnfutn7nhd6RUJiGCey2
>sCH0PBAFhonINuI/bm0ACk4gRuwoQfERuLUMeESvMjNbcnt1qrpjsPVB9GyUs8x5
>kB4gTzjD5UXQOF+EnD5I9wgSsPlXeTfwLXTs4RXUdTKoYHkxhsDJ9mZy58+NAAUR
>tCZEYW5ueSBNY1F1ZXN0aW9uIDxkY21jcXVlc0B2YW50ZWsubmV0PokAlQMFEDF1
>3jq89vGA2+K4WQEBa6gEAIxGmjwzJ0ezTPJdDKro+C55y9XVjoRWNcGSXDZHtDun
>/aGx16AQ98RjCOoJH48ze4keG+KsUrSa7xXaPQpbOnoAP6I6Yanq3lxSEZzkUj/V
>EL+C8LWDJli5dPyXXVnvyiZ4uoVpydQeL1lEzXm4xoCOMWe5pUkjc1+B3dtWb2Mw
>iQCVAwUQMXXYK8DJ9mZy58+NAQFWEQP/TRU0eIpW2LaHygMNeiISOcPr3YX7Gbga
>pdVi1oqi6ujSS5bWAE2qQG8OGpYjz25JpYBUMQgxfsaqhZ/P820CrcChqgu99ujM
>J0goQPr2SY5mezg9Z8rd7EVgTg0BMIVjGSTf3IAPGdH9gStzSeFDKtGEzYgn+9tx
>S7ZNYDwImUg=
>=cnWd
>-----END PGP PUBLIC KEY BLOCK-----
>
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>* This is the Midrange System Mailing List!  To submit a new message,   *
>* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
>* this list send email to MAJORDOMO@midrange.com and specify            *
>* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
>* should be directed to the list owner / operator: david@midrange.com   *
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>
Carl J. Galgano
EDI Consulting Services, Inc.   
540 Powder Springs Street
Suite C19
Marietta, GA 30064
770-422-2995

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *